
FIDUR 8/200 — E Fe 10
Choose the size
- Ø 2.5 × 350 mm · 5 kg≈ 5 kg
- Ø 3.25 × 450 mm · 6 kg≈ 6 kg
- Ø 4 × 450 mm · 6 kg≈ 6 kg
- Ø 5 × 450 mm · 6 kg≈ 6 kg
We reply within 1 working day.
Field of application
Electrode for hardfacing machine parts subject to heavy rolling and compressive wear (rolling contact), such as turnouts and crossings. Also suitable for intermediate layers for stress compensation in hardfacing and for crack-resistant surfacing on difficult-to-weld, higher-carbon materials and austenitic manganese steel, as well as heat-resisting and stainless steels and cast steels, for use at service temperatures up to 300 °C. The austenitic weld metal is stainless, heat-resisting, resistant to scaling up to 850 °C and resistant to sulphur-containing combustion gases up to a maximum of 500 °C, thermal-shock resistant, non-magnetic and work-hardenable.
| Positions | PA flat PB horizontal-vertical |
|---|---|
| Polarity | DC+/AC |
Classification and approvals
Classification
| EN 14700 class | E Fe 10 |
|---|---|
| Material no. (W.-Nr.) | 1.4370 |
| DIN 8555 class | E 8-UM-200 CKNZ |
Composition and properties
Chemical composition of the weld metal
| C | 0.10 |
|---|---|
| Cr | 19.0 |
| Mn | 6.00 |
| Ni | 9.00 |
| Si | 0.90 |
Hardness
- as welded — approx. 180 HB
- Hardness after work hardening — approx. 350 HB
How to weld
Treatment and preparation
| Re-drying | 300–350 °C / 2 h |
|---|
Storage
In the original packaging, in dry, ventilated rooms: 5–30 °C, relative humidity < 60 %, up to 2 years.
| Moisture in the covering | More spatter and porosity: redry, above all when low hydrogen content is required. |
|---|
Welding parameters by diameter
| Ø | Length | Current |
|---|---|---|
| 2.5 mm | 350 mm | 90–110 A |
| 3.25 mm | 450 mm | 110–150 A |
| 4 mm | 450 mm | 140–180 A |
| 5 mm | 450 mm | 180–220 A |