Kjellberg · Hardfacing

FIDUR 7/200 — E Fe 9
Technical datasheet · covered electrode · stick electrode · Ø 3.25 – 5 mm
FT-FIDUR-7-200-EN
rev. 2 · 2026-11-21
page 1 / 1
rev. 2 · 2026-11-21
page 1 / 1
Type
covered electrode · stick electrode
Standard
E Fe 9
Diameters
Ø 3.25 – 5 mm
Sizes and packaging
Ø
Length
Current
Packaging
Code
3.25 mm
350 mm
110–150 A
5 kg
KJB-00626323
4 mm
450 mm
140–180 A
6 kg
KJB-00626404
5 mm
450 mm
180–220 A
6 kg
KJB-00626504
Application
Austenitic manganese steel electrode for hardfacing workpieces and machine parts of austenitic manganese steel, such as excavator teeth, blow bars, crusher jaws and crossings, that are mainly subject to impact and shock loading. The as-welded hardness of 200 HB can be raised up to 500 HB by work hardening under mechanical loading.
Classification
EN 14700 class
E Fe 9
DIN 8555 class
E 7-UM-200-500 KP
Chemical composition of the weld metal
C
Cr
Mn
Si
0.80
14.0
16.0
0.50
Values in mass %.
Hardness
as welded
approx. 180 HB
Hardness after work hardening
approx. 500 HB
Process
Polarity
DC+/AC
Positions
PA flat · PB horizontal-vertical · PC horizontal · PF vertical-up
Treatment and preparation
Re-drying
300–350 °C / 2 h
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-FIDUR-7-200-EN · rev. 2 · page 1 / 1
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Kjellberg 2019 catalogue