We open on 1 January 2027. Until then we are not accepting registrations or requests.
Datasheetas published in the maker's catalogueCross-referencesacross makers and AWS / EN ISO classesDeliverySpain and PortugalESPTEN
FERVEO
Basket
Kjellberg · Hardfacing

FIDUR 6/55 — E Fe 6

covered electrode · stick electrodebasic coating

Choose the size

  • Ø 3.25 × 450 mm · 6 kg
    ≈ 6 kg
  • Ø 4 × 450 mm · 6 kg
    ≈ 6 kg
  • Ø 5 × 450 mm · 6 kg
    ≈ 6 kg
To order · price and lead time in the quote

We reply within 1 working day.

Field of application

Electrode for hard and tough, impact- and abrasion-resistant deposits on non-alloy and low-alloy higher-strength materials. Suitable for hardfacing excavator teeth, blow bars, scrapers, screw conveyors, mill hammers, mixer blades, crusher jaws, crusher cones, etc. The deposit can be machined by grinding only.

PositionsPA flat PB horizontal-vertical PC horizontal PF vertical-up
PolarityDC+

Classification and approvals

Classification

EN 14700 classE Fe 6
DIN 8555 classE 6-UM-55

Composition and properties

Chemical composition of the weld metal

C0.60
Cr5.00
Mn1.00
Si0.30
Values in mass %.

Hardness

  • as welded — 52–55 HRC

How to weld

Treatment and preparation

Re-drying300–350 °C / 2 h

Storage

In the original packaging, in dry, ventilated rooms: 5–30 °C, relative humidity < 60 %, up to 2 years.

Moisture in the coveringMore spatter and porosity: redry, above all when low hydrogen content is required.
According to the Kjellberg 2019 catalogue

Welding parameters by diameter

ØLengthCurrent
3.25 mm450 mm110–140 A
4 mm450 mm140–180 A
5 mm450 mm170–220 A
FERVEO guidance
By problem
Wear-resistant hardfacing