We open on 1 January 2027. Until then we are not accepting registrations or requests.
Datasheetas published in the maker's catalogueCross-referencesacross makers and AWS / EN ISO classesDeliverySpain and PortugalESPTEN
FERVEO
Basket
Kjellberg · Tool steels

FIDUR 4/60 — E Fe 4

covered electrode · stick electroderutile coating

Choose the size

  • Ø 2.5 × 350 mm · 5 kg
    ≈ 5 kg
  • Ø 3.25 × 350 mm · 5 kg
    ≈ 5 kg
  • Ø 4 × 350 mm · 5 kg
    ≈ 5 kg
To order · price and lead time in the quote

We reply within 1 working day.

Field of application

Electrode for hard, wear-resistant deposits combined with high toughness. It is used for hardfacing cutting edges on low-alloy steel tools and for repairing high-speed steel tools. The weld metal is particularly resistant to severe abrasion, resistant to impact and shock, and has good edge retention.

PositionsPA flat PB horizontal-vertical PC horizontal
PolarityDC+/AC

Classification and approvals

Classification

EN 14700 classE Fe 4
DIN 8555 classE 4-UM-60 ST

Composition and properties

Chemical composition of the weld metal

C0.90
V1.50
W2.00
Cr4.50
Mn0.50
Mo8.00
Si0.30
Values in mass %.

Hardness

  • as welded — 59–62 HRC
  • after tempering: 530 °C, 2 h, air cooling — 63–65 HRC
  • after heat treatment — 60–63 HRC

How to weld

Treatment and preparation

Re-drying300–350 °C / 2 h

Storage

In the original packaging, in dry, ventilated rooms: 5–30 °C, relative humidity < 60 %, up to 2 years.

Moisture in the coveringMore spatter and porosity: redry, above all when low hydrogen content is required.
According to the Kjellberg 2019 catalogue

Welding parameters by diameter

ØLengthCurrent
2.5 mm350 mm80–110 A
3.25 mm350 mm110–140 A
4 mm350 mm130–170 A
FERVEO guidance
By problem
Wear-resistant hardfacing