We open on 1 January 2027. Until then we are not accepting registrations or requests.
Datasheetas published in the maker's catalogueCross-referencesacross makers and AWS / EN ISO classesDeliverySpain and PortugalESPTEN
FERVEO
Basket
Kjellberg · Tool steels

FIDUR 3/50 — E Fe 3

covered electrode · stick electroderutile coating

Choose the size

  • Ø 3.25 × 350 mm · 5 kg
    ≈ 5 kg
  • Ø 4 × 350 mm · 5 kg
    ≈ 5 kg
To order · price and lead time in the quote

We reply within 1 working day.

Field of application

Electrode for repairing hot-work tools of matching steels, such as forging dies, press dies, press and rolling mandrels, hot drawing dies, and hot-cutting and hot-upsetting tools of non-alloy or low-alloy higher-strength steels.

PositionsPA flat PB horizontal-vertical PC horizontal
PolarityDC+/AC

Classification and approvals

Classification

EN 14700 classE Fe 3
DIN 8555 classE 3-UM-50 T

Composition and properties

Chemical composition of the weld metal

C0.25
V0.60
W4.00
Cr2.50
Mn0.50
Si0.30
Values in mass %.

Hardness

  • as welded — approx. 47 HRC
  • after heat treatment — approx. 50 HRC

How to weld

Treatment and preparation

Re-drying300–350 °C / 2 h

Storage

In the original packaging, in dry, ventilated rooms: 5–30 °C, relative humidity < 60 %, up to 2 years.

Moisture in the coveringMore spatter and porosity: redry, above all when low hydrogen content is required.
According to the Kjellberg 2019 catalogue

Welding parameters by diameter

ØLengthCurrent
3.25 mm350 mm110–140 A
4 mm350 mm140–180 A
FERVEO guidance
By problem
Wear-resistant hardfacing