Copper & bronze
FERVEO CUP NI10 MIG
solid wireCatalogue only
also as: TIG rod
AWS class
ERCuNi 90/10
EN ISO class
S Cu 7061 (CuNi10)
Tensile strength (Rm)
300 MPa
Classification
| AWS class | ERCuNi 90/10 |
|---|---|
| EN ISO class | S Cu 7061 (CuNi10) |
| Material no. (W.-Nr.) | 2.0873 |
Purpose
- 90/10 cupronickel solid wire (CuNi10) for joining copper-nickel alloys.
Why it works
The 10% nickel content matches the standard 90/10 cupronickel used in seawater piping and condensers — the filler reproduces that same alloy to keep property continuity across the joint.
Fields of application
- Joining 90/10 copper-nickel alloys.
Chemical composition
| Element | Typical, % |
|---|---|
| Cu | balance |
| Fe | 1.8 |
| Mn | 1 |
| Ni | 10 |
| Ti | 0.5 |
Mechanical properties
| Tensile strength (Rm) | 300 MPa |
|---|---|
| Yield strength (Rp0.2) | 200 MPa |
| Elongation (A5) | 30 % |
Process
| Polarity | DC+ |
|---|---|
| Shielding gas | I1 |
Sizes and part numbers
| Ø | Request |
|---|---|
| 0.8 mm | |
| 1 mm | |
| 1.2 mm | |
| 1.6 mm |
Supply programme
spools D100 / D200 / K200 / K300
Base metals
CUNIFER 10CUNIFER 30
Advantages
- 90/10 alloy — directly compatible with cupronickel piping and condensers of that ratio.
Limitations
- Not suitable for oxy-fuel gas welding.
- Modest mechanical strength (Rm 300 MPa), typical of this family — not intended for high-load structural use.