Aluminium
FERVEO ALU 5356 TIG
TIG rodCatalogue only
also as: solid wire
AWS class
ER 5356
EN ISO class
EN ISO 18273 (2016) : Al 5356 - AlMg5Cr(A) ..
Tensile strength (Rm)
250 MPa
Service temperature
−196 … 100 °C
Classification
| AWS class | ER 5356 |
|---|---|
| EN ISO class | EN ISO 18273 (2016) : Al 5356 - AlMg5Cr(A) .. |
Purpose
- Al-Mg (5% Mg) solid TIG rod for general structural use, the most common in the Al-Mg family.
- Service from -196°C — suitable for cryogenic applications.
Why it works
The elevated magnesium (5%) gives the highest mechanical strength among this datasheet's standard Al-Mg rods (Rm 250 MPa) while keeping good ductility (A5 25%) — the reference combination for general welded aluminum structure, unless service is at sustained elevated temperature.
Fields of application
- General structural joining of aluminum-magnesium alloys (DIN 3.2315, 3.3206, 3.3210 and equivalents).
- Cryogenic applications — documented service from -196°C.
Chemical composition
| Element | Typical, % |
|---|---|
| Al | balance |
| Mg | 5 |
| Mn | 0.3 |
| Ti | 0.15 |
Mechanical properties
| Tensile strength (Rm) | 250 MPa |
|---|---|
| Yield strength (Rp0.2) | 100 MPa |
| Elongation (A5) | 25 % |
| Service temperature | −196 … 100 °C |
Process
Sizes and part numbers
| Ø | Request |
|---|---|
| 1 mm | |
| 1.6 mm | |
| 2.4 mm | |
| 3.2 mm |
Supply programme
boxes 10 kg
Cross-reference
| Replaces UNION AlMg 5 (Böhler) | Direct replacement |
| Replaces OK Tigrod 5356 (ESAB) | Direct replacement |
| Replaces SuperGlaze TIG 5356 (Lincoln) | Direct replacement |
| Replaces TAL 5356 (Magmaweld) | Direct replacement |
| Replaces ALUROD AlMg5 (Oerlikon) | Direct replacement |
| Replaces ALG5 (Selectarc) | Direct replacement |
Equivalence refers to the classification (AWS / EN ISO), not to product identity. In applications with a qualified procedure (WPS), validate the substitution before use.
Base metals
3.23153.32063.32103.32113.32613.35353.35373.35413.35453.35553.35613.4335
Advantages
- Best strength-ductility combination among this datasheet's standard Al-Mg rods.
- Suitable for cryogenic service down to -196°C.
Limitations
- Maximum documented service 100°C — rods with Mg >3% (like this one) aren't recommended for sustained elevated temperature due to sensitization risk (loss of intergranular corrosion resistance).
- Doesn't provide ALU 5183's higher strength if the application demands more structural load capacity.