Download PDF
← Technical datasheet
Gedik · Creep-resisting Cr-Mo steels
FERVEO

FC TIG-B2 FCW — E80C-B2(mod.)

Technical datasheet · flux-cored wire (FCW) · Ø 2.4 mm
FT-FC-TIG-B2-FCW-EN
rev. 2 · 2026-11-21
page 1 / 1
Type
flux-cored wire (FCW)
Standard
E80C-B2(mod.)
Diameters
Ø 2.4 mm
Sizes and packaging
Ø
Length
Packaging
Code
2.4 mm
1000 mm
5 kg
GDK-3010600001
Application
  • Recommended for welding of Cr-Mo alloyed steels which are used for the production of boilers, tubes, pipes and nitride steels
  • Weld metal is resistant to temperatures up to +570°C
  • Suitable for step-cooling applications
  • Shielding Gas: 100% Argon
Classification
AWS class
E80C-B2(mod.)
EN ISO class
W Z Cr Mo1Si
Approvals

CE, SEPRO

Validity is confirmed with the order

Chemical composition of the weld metal
C
Cr
Mn
Mo
Si
0.06
1.00
0.90
0.50
0.55
Values in mass %.
Base metals

13CrMo4-5 · 15CrMo5 · 42CrMo4 · 16CrMoV4 · 25CrMo4 · 24CrMo5 · G22CrMo5-4 · G17CrMo5-5

Mechanical properties
typical values
after heat treatment: 680 °C / 2 h
Yield strength (Rp0.2)
min. 355 MPa
Tensile strength (Rm)
min. 550 MPa
Elongation (A5)
min. 20 %
Impact energy (KV)
min. 47 J (−40 °C)
Process
Shielding gas
100% Ar
Positions
PA flat · PB horizontal-vertical · PC horizontal · PD horizontal-overhead · PE overhead · PF vertical-up · PG vertical-down
Shielding
Requires shielding gas
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-FC-TIG-B2-FCW-EN · rev. 2 · page 1 / 1

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Gedik 2023 catalogue