Gedik · Hardfacing

FAZER 65 B — E Fe 16
Technical datasheet · covered electrode · stick electrode · Ø 3.2 – 4 mm
FT-FAZER-65-B-EN
rev. 2 · 2026-11-21
page 1 / 1
rev. 2 · 2026-11-21
page 1 / 1
Type
covered electrode · stick electrode
Standard
E Fe 16
Diameters
Ø 3.2 – 4 mm
Sizes and packaging
Ø
Length
Current
Packaging
Code
3.2 mm
350 mm
110–150 A
5 kg
GDK-3030100061
4 mm
350 mm
140–200 A
5 kg
GDK-3030100062
Application
- Special electrode whose alloying elements come from the covering, with chromium-boron carbides
- For hardfacing parts exposed to wear in mines and quarries, in the earthmoving and cement industries and in similar fields
- Used for all wear-resistant hardfacing, such as buckets and teeth of heavy construction machinery, drill bits, screws in the brick industry, slurry pumps, mixer blades, agricultural machinery, crusher jaws and rolls, and screw conveyors
- Very high wear resistance
- High deposition rate
- High metal recovery
- Machinable by grinding only
- For multi-layer hardfacing, a buffer layer with a basic electrode (depending on the parent material) or with GeKaTec Unibase 660 HD is recommended
- Owing to the high hardness, transverse cracks may occur; do not weld more than 2 passes
- Hold the electrode perpendicular to the workpiece
- The electrodes must be redried at 300 °C to 350 °C for 2 h before use
Classification
EN 14700 class
E Fe 16
DIN 8555 class
E 10-UM-65 R
Approvals
SEPRO
Validity is confirmed with the order
Hardness
1st layer
61–65 HRC
2nd layer
64–68 HRC
Process
Polarity
DC+/AC
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-FAZER-65-B-EN · rev. 2 · page 1 / 1
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Gedik 2023 catalogue