Gedik · Hardfacing

FAZER 17 MnCr — E Fe 9
Technical datasheet · covered electrode · stick electrode · Ø 3.2 – 4 mm
FT-FAZER-17-MNCR-EN
rev. 2 · 2026-11-21
page 1 / 1
rev. 2 · 2026-11-21
page 1 / 1
Type
covered electrode · stick electrode
Standard
E Fe 9
Diameters
Ø 3.2 – 4 mm
Sizes and packaging
Ø
Length
Current
Packaging
Code
3.2 mm
350 mm
110–140 A
5 kg
GDK-3030100050
4 mm
350 mm
150–180 A
5 kg
GDK-3030100051
Application
- For hardfacing high-manganese steels
- Most common applications: hardfacing of equipment parts exposed to high impact, pressure and wear in the cement, mining and earthmoving industries
- High resistance to impact and friction
- The hardness of the weld metal increases after exposure to impact and friction
- High toughness
- Hold the electrode perpendicular to the workpiece and keep a short arc length
- On hard manganese steels, weld if possible with the workpiece in water, do not dwell in one spot and keep the heat input low
- For very thick hardfacing layers, one or two buffer layers with GeKaTec Unibase 660 HD are required for good bonding and protection against cracking
- The electrodes must be redried at 300 °C for 2 h before use
Classification
EN 14700 class
E Fe 9
DIN 8555 class
E 7-UM-250KP
Approvals
SEPRO
Validity is confirmed with the order
Hardness
as welded
250 HB
Hardness after work hardening
550 HB
Process
Polarity
DC+/AC
Treatment and preparation
Re-drying
300 °C / 2 h
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-FAZER-17-MNCR-EN · rev. 2 · page 1 / 1
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Gedik 2023 catalogue