We open on 1 January 2027. Until then we are not accepting registrations or requests.
Datasheetas published in the maker's catalogueCross-referencesacross makers and AWS / EN ISO classesDeliverySpain and PortugalESPTEN
FERVEO
Basket
Gedik · Low-alloy steels

ER 110 SG TIG — ER 110S-G

TIG rod

Choose the size

  • Ø 1.6 × 1000 mm · 5 kg
    ≈ 5 kg
  • Ø 2 × 1000 mm · 5 kg
    ≈ 5 kg
  • Ø 2.4 × 1000 mm · 5 kg
    ≈ 5 kg
To order · price and lead time in the quote

We reply within 1 working day.

How much filler metal do I need?With this product's data: 141 · η 0.94
Thickness of the plates to be joinedref. 1.3: 3 < t ≤ 10
Sum of all identical welds

4.82–6.52 kg

of ER 110 SG TIG for 10 m of weld

2 packs of 5 kg

Calculated with: η 0.9405: TIG with filler rod, 0.99 less the stub s of a 1000 mm rod · preparation per EN ISO 9692-1 · EN ISO 5817 level C

See the full calculation →

Field of application

  • ER 110 SG is low alloyed and high strength GMAW wire and GTAW rods
  • It is used for joining of the high strength low alloy steels and the fine grained constructional steels with minimum yield strength of 690 N/mm2, especially Hardox and Weldox sheets
  • Boilers, pressure vessels, pipelines, structure steels are the other application areas
  • Weld metal has high impact and toughness at low temperatures
  • Pre-heat can be according to the base material
  • Shielding gases - MAG: (Ar+% 15-25 CO2) / TIG: (Ar)

Base metals

S690QL690MN-A-XTRA 70USS-T1BH 70 VHY 100ASTM A514 Gr.F
PositionsPA flat PB horizontal-vertical PC horizontal PD horizontal-overhead PE overhead PF vertical-up PG vertical-down
PolarityDC−
Shielding gasAr

Classification and approvals

Classification

AWS classER 110S-G
EN ISO classG 69 4 M21 Mn3Ni1CrMo

Approvals

  • CE, SEPRO
According to the Gedik 2023 catalogue; validity is confirmed with the order

Composition and properties

Chemical composition of the wire

C0.09
Cr0.30
Cu0.20
Mn1.70
Mo0.50
Ni2.00
Si0.75
Values in mass %.

Mechanical properties

Yield strength (Rp0.2)min. 690 MPa
Tensile strength (Rm)min. 760 MPa
Elongation (A5)19 %
Impact energy (KV)min. 47 J (−30 °C)

How to weld

Process

ShieldingRequires shielding gas

Treatment and preparation

Pre-heatingaccording to the base material
FERVEO guidance
By problem
Structural steels