We open on 1 January 2027. Until then we are not accepting registrations or requests.
Datasheetas published in the maker's catalogueCross-referencesacross makers and AWS / EN ISO classesDeliverySpain and PortugalESPTEN
FERVEO
Basket
Gedik · Stainless steels

ELOXCOR S 316 L FCW — E 316 L T1-1/-4

flux-cored wire (FCW)

Choose the size

  • Ø 1.2 mm · D 300
    ≈ 15 kg
To order · price and lead time in the quote

We reply within 1 working day.

How much filler metal do I need?With this product's data: 136 · η 0.80–0.90
Thickness of the plates to be joinedref. 1.3: 3 < t ≤ 10
Sum of all identical welds

5.13–7.81 kg

of ELOXCOR S 316 L FCW for 10 m of weld

1 pack of 15 kg

Calculated with: η 0.80–0.90: typical value for process 136 · preparation per EN ISO 9692-1 · EN ISO 5817 level C

See the full calculation →
Which filler joins two different metals?With this product's data: 316L

Not recommendedFN 0.0 (WRC-1992)

  • Fully austenitic: sensitive to hot cracking.

Maximum dilution with this filler: 4.0 %

Calculated with: filler 316L — this product · dilution 30 % typical of 136, equal shares of each metal

See the full calculation →

Field of application

  • Rutile type, rapid hardening flux cored wire
  • Weld metal microstructure is austenite (CrNiMo alloyed, 316 type)
  • Used in welding of high carbon and stabilized 316 grade steels, low carbon 316 L grade stainless steels, food, pharmaceutical, chemical dye and machinery and equipment industries
  • Weld metal has resisting between -110°C and 400°C service temperature
  • Shielding Gas: CO2 or M21

Base metals

(1.4401) X5CrNiMo 17-12-2(1.4404) X2CrNiMo 17-12-2(1.4435) X2CrNiMo 18-14-3(1.4436) X3 CrNiMo 17-13-3(1.4571) X6 CrNiMoTi 17-12-2(1.4580) X6 CrNiMoNb 17-12-2(1.4583) X10 CrNiMoNb 18-12(1.4409) GX2 CrNiMo 19-11-2AISI 316 L316 Ti316 Cb
PositionsPA flat PB horizontal-vertical PC horizontal PD horizontal-overhead PE overhead PF vertical-up PG vertical-down
PolarityDC+
Shielding gasCO2, M21

Classification and approvals

Classification

AWS classE 316 L T1-1/-4
EN ISO classT Z 19 12 3 L P M21/C1 1

Approvals

  • ELOXCOR S 316 L (CO2): DNV-GL, SEPRO, CE
According to the Gedik 2023 catalogue; validity is confirmed with the order

Composition and properties

Chemical composition of the weld metal

C0.03
Cr19.0
Mn1.40
Mo2.10
Ni12.0
Si0.80
Values in mass %.

Mechanical properties

typical values, with M21 gas
Yield strength (Rp0.2)490 MPa
Tensile strength (Rm)600 MPa
Elongation (A5)32 %
Impact energy (KV)35 J (−110 °C)
Service temperaturemax. 400 °C

How to weld

Process

ShieldingRequires shielding gas
FERVEO guidance
By problem
Corrosion-resistant alloys