We open on 1 January 2027. Until then we are not accepting registrations or requests.
Datasheetas published in the maker's catalogueCross-referencesacross makers and AWS / EN ISO classesDeliverySpain and PortugalESPTEN
FERVEO
Basket
Gedik · Stainless steels

ELOXCOR S 309 L FCW — E309L T1-1/-4

flux-cored wire (FCW)

Choose the size

  • Ø 1.2 mm · D 300
    ≈ 15 kg
To order · price and lead time in the quote

We reply within 1 working day.

How much filler metal do I need?With this product's data: 136 · η 0.80–0.90
Thickness of the plates to be joinedref. 1.3: 3 < t ≤ 10
Sum of all identical welds

5.07–7.71 kg

of ELOXCOR S 309 L FCW for 10 m of weld

1 pack of 15 kg

Calculated with: η 0.80–0.90: typical value for process 136 · preparation per EN ISO 9692-1 · EN ISO 5817 level C

See the full calculation →
Which filler joins two different metals?With this product's data: 309L

With reservationsFN 2.1 (WRC-1992)

  • Ferrite below 3 FN: risk of hot cracking (API RP 582, TWI).

Maximum dilution with this filler: 25.5 %

Calculated with: filler 309L — this product · dilution 30 % typical of 136, equal shares of each metal

See the full calculation →

Field of application

  • ELOXCOR S 309L is rutile fast freezing type flux cored wire
  • Austenitic-ferritic deposit in over-alloyed CrNi steel-type 309L, with optimised ferrite content for joining dissimilar metals
  • Joining of steels with similar compositions and joining carbon steels to Stainless steels
  • Buffering before cladding. Service temperatures from - 60°C to + 350°C
  • Shielding Gas: CO2 or M21

Base metals

High-strength unalloyed and heat-treatable steelsferritic Cr and austenitic CrNi steelsaustenitic Mn steelsunalloyed tempered steelstool steelshard manganese steelsferritic chromium steelsaustenitic nickel-chromium steelshard-to-weld steelssimilar-type austenitic steelsdissimilar metalscorrosion resistant stainless steel with mild or low alloy steelsclad steels
PositionsPA flat PB horizontal-vertical PC horizontal PD horizontal-overhead PE overhead PF vertical-up PG vertical-down
PolarityDC+
Shielding gasCO2, M21

Classification and approvals

Classification

AWS classE309L T1-1/-4
EN ISO classT 23 12 L P M21/C1 1

Approvals

  • ELOXCOR S 309 L (CO2): DNV-GL, SEPRO, CE
According to the Gedik 2023 catalogue; validity is confirmed with the order

Composition and properties

Chemical composition of the weld metal

C0.03
Cr23.5
Mn1.40
Ni13.0
Si0.70
Values in mass %.

Mechanical properties

typical values, with M21 gas
Yield strength (Rp0.2)460 MPa
Tensile strength (Rm)580 MPa
Elongation (A5)35 %
Impact energy (KV)40 J (−60 °C)
Service temperaturemax. 350 °C

How to weld

Process

ShieldingRequires shielding gas
FERVEO guidance
By problem
Dissimilar metalsStainless steel and dissimilar metalsCorrosion-resistant alloys