Gedik · Stainless steels

ELOXCOR S 307 FCW — E307T1-1/-4 (mod.)
Technical datasheet · flux-cored wire (FCW) · Ø 1.2 mm
FT-ELOXCOR-S-307-FCW-EN
rev. 2 · 2026-11-21
page 1 / 2
rev. 2 · 2026-11-21
page 1 / 2
Type
flux-cored wire (FCW)
Standard
E307T1-1/-4 (mod.)
Diameters
Ø 1.2 mm
Application
- ELOXCOR S 307 is rutile fast freezing type flux cored wire
- Work-hardening austenitic deposit in CrNiMn steel modified type 307
- Dissimilar joint, welding of steels of unknown types, armouring steels, buffering joining of 14 %Mn austenitic steels
- Service temperatures from -120°C to +300°C
- Shielding Gas: CO2 or M21
Classification
AWS class
E307T1-1/-4 (mod.)
EN ISO class
T 18 8 Mn P M21/C1 1
Approvals
CE, SEPRO
Validity is confirmed with the order
Chemical composition of the weld metal
C
Cr
Mn
Ni
Si
0.10
19.0
6.00
9.00
0.70
Values in mass %.
Base metals
High-strength low alloyed and alloyed heat-treatable steels · armor steels · steels including 14 % Mn · ferritic chromium steels · heat-resistant steels · non-magnetic steels
Mechanical properties
typical values, with M21 gas
Yield strength (Rp0.2)
480 MPa
Tensile strength (Rm)
630 MPa
Elongation (A5)
40 %
Impact energy (KV)
50 J (20 °C)
Service temperature
max. 300 °C
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-ELOXCOR-S-307-FCW-EN · rev. 2 · page 1 / 2
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Gedik 2023 catalogue