We open on 1 January 2027. Until then we are not accepting registrations or requests.
Datasheetas published in the maker's catalogueCross-referencesacross makers and AWS / EN ISO classesDeliverySpain and PortugalESPTEN
FERVEO
Basket
Gedik · Stainless steels

ELOX SG 310 MIG — ER 310

solid wire
also as: TIG rod

Choose the size

  • Ø 0.8 mm · BS 300
    ≈ 12.5 kg
  • Ø 1 mm · BS 300
    ≈ 15 kg
  • Ø 1.2 mm · BS 300
    ≈ 15 kg
To order · price and lead time in the quote

We reply within 1 working day.

How much filler metal do I need?With this product's data: 135 · η 0.92–0.98
Thickness of the plates to be joinedref. 1.3: 3 < t ≤ 10
Sum of all identical welds

4.65–6.71 kg

of ELOX SG 310 MIG for 10 m of weld

1 pack of 12.5 kg

Calculated with: η 0.92–0.98: typical value for process 135 · preparation per EN ISO 9692-1 · EN ISO 5817 level C

See the full calculation →
Which filler joins two different metals?With this product's data: 310

Not recommendedFN — (WRC-1992)

  • Fully austenitic: sensitive to hot cracking.
  • Filler 310 gives a fully austenitic weld: with carbon-steel dilution it is prone to hot cracking. For this joint use 309L or 312.

Calculated with: filler 310 — this product · dilution 20 % typical of 135, equal shares of each metal

See the full calculation →

Field of application

  • Applicability in cement and ceramic industries, in manufacturing processes of industrial furnaces, oil refineries, in welding of steel and steel castings used in steam boiler manufacturing
  • Suitability of weld metal for use at temperatures between -196°C and 1200°C
  • Suitability for both TIG and MIG welding
  • Requirement of use of Ar as shielding gas in TIG welding, and of Ar+ %2.5 O2 or Ar+ %2.5 CO2 mixed gas as shielding in MIG welding

Base metals

X15CrNiSi 25 20X12CrNi 25 21X15CrNi 20 12G-X15CrNi 25 20G-X40 CrNi 25 21X10CrAl 7X10CrAl 18X10CrAl 24305310314A297 HFA297 HJ
PositionsPA flat PB horizontal-vertical PC horizontal PD horizontal-overhead PE overhead PF vertical-up PG vertical-down
PolarityDC+
Shielding gasAr + 2.5% O2, Ar + 2.5% CO2

Classification and approvals

Classification

AWS classER 310
EN ISO classG 25 20

Approvals

  • CE, SEPRO
According to the Gedik 2023 catalogue; validity is confirmed with the order

Composition and properties

Chemical composition of the wire

C0.12
Cr25.0
Mn1.60
Ni20.5
Si0.50
Values in mass %.

Mechanical properties

Yield strength (Rp0.2)min. 350 MPa
Tensile strength (Rm)550–720 MPa
Elongation (A5)min. 30 %
Impact energy (KV)min. 63 J (20 °C)
Service temperature−196–1200 °C

How to weld

Process

ShieldingRequires shielding gas
FERVEO guidance
By problem
Corrosion-resistant alloys
Alternatives in the catalogue
Same class
same EN ISO designation
ProductClassRmKVAvailability
DT-1.4842 MIGDratecG 25 20620 MPa75 JTo order · price and lead time in the quote