Gedik · Stainless steels
ELOX SG 309 L Si MIG — ER 309 L Si
solid wire
Choose the size
- Ø 0.8 mm · BS 300≈ 12.5 kg
- Ø 1 mm · BS 300≈ 15 kg
- Ø 1.2 mm · BS 300≈ 15 kg
To order · price and lead time in the quote
We reply within 1 working day.
How much filler metal do I need?With this product's data: 135 · η 0.92–0.98
Thickness of the plates to be joinedref. 1.3: 3 < t ≤ 10
Sum of all identical welds
4.65–6.71 kg
of ELOX SG 309 L Si MIG for 10 m of weld
1 pack of 12.5 kg
Calculated with: η 0.92–0.98: typical value for process 135 · preparation per EN ISO 9692-1 · EN ISO 5817 level C
See the full calculation →Which filler joins two different metals?With this product's data: 309L
SuitableFN 4.4 (WRC-1992)
✓
Maximum dilution with this filler: 25.5 %
Calculated with: filler 309L — this product · dilution 20 % typical of 135, equal shares of each metal
See the full calculation →Field of application
- Applicability on ferritic Cr or austenitic CrNi steels, austenitic manganese steels, unalloyed high-strength steels, heat-treated steels
- Usability in welding austenitic stainless steels, in joint-welding of different kinds of metals, in buffer layers, in joint-welding of corrosion-resistant stainless steels to each other or to low-alloyed steels, and in welding coated steels
- Ar+ %2.5 O2 or (Ar+%2.5 CO2) gas is used as shielding gas
Base metals
Ferritic Cr and austenitic CrNi steelsaustenitic manganese steelsunalloyed high strength steelshigh temperature steels
| Positions | PA flat PB horizontal-vertical PC horizontal PD horizontal-overhead PE overhead PF vertical-up PG vertical-down |
|---|---|
| Polarity | DC+ |
| Shielding gas | Ar + 2.5% O2, Ar + 2.5% CO2 |
Classification and approvals
Classification
| AWS class | ER 309 L Si |
|---|---|
| EN ISO class | G 23 12 L Si |
Approvals
- CE, SEPRO
According to the Gedik 2023 catalogue; validity is confirmed with the order
Composition and properties
Chemical composition of the wire
| C | 0.03 |
|---|---|
| Cr | 23.5 |
| Mn | 1.80 |
| Ni | 13.0 |
| Si | 0.80 |
Values in mass %.
Mechanical properties
| Yield strength (Rp0.2) | min. 320 MPa |
|---|---|
| Tensile strength (Rm) | min. 520 MPa |
| Elongation (A5) | min. 30 % |
| Impact energy (KV) | min. 47 J (20 °C) |
How to weld
Process
| Shielding | Requires shielding gas |
|---|
FERVEO guidance
By problem
Dissimilar metalsStainless steel and dissimilar metalsCorrosion-resistant alloys
Alternatives in the catalogue
Same class
same EN ISO designation
| Product | Class | Rm | KV | Availability |
|---|---|---|---|---|
| DT-1.4332 MIGDratec | G 23 12 L Si | 600 MPa | 65 J | To order · price and lead time in the quote |