We open on 1 January 2027. Until then we are not accepting registrations or requests.
Datasheetas published in the maker's catalogueCross-referencesacross makers and AWS / EN ISO classesDeliverySpain and PortugalESPTEN
FERVEO
Basket
Gedik · Stainless steels

ELOX SG 307 TIG — ~ER 307

TIG rod
also as: solid wire

Choose the size

  • Ø 2 × 1000 mm · plastic box
    ≈ 5 kg
  • Ø 2.4 × 1000 mm · plastic box
    ≈ 5 kg
  • Ø 3.2 × 1000 mm · plastic box
    ≈ 5 kg
To order · price and lead time in the quote

We reply within 1 working day.

Which filler joins two different metals?With this product's data: 307

SuitableFN 0.0 (WRC-1992)

  • Fully austenitic with manganese: tolerates no ferrite (307 type).

Maximum dilution with this filler: 45.5 %

Calculated with: filler 307 — this product · dilution 30 % typical of 141, equal shares of each metal

See the full calculation →

Field of application

  • Filler welding of high-strength low-alloyed and alloyed heat-treatable steels, armor steels, steels including 14 % Mn, ferritic chromium steels, heat-resistant steels, non-magnetic steels etc.
  • Joint welding of different types of steels with each other
  • Filler welding of abrasion-resistant steels for valves and turbines
  • As shielding gas, Argon is used at TIG welding, where as Ar+ % 2.5 O2 or Ar+ % 2.5 CO2 mixed gas is used at MIG welding
PositionsPA flat PB horizontal-vertical PC horizontal PD horizontal-overhead PE overhead PF vertical-up PG vertical-down
PolarityDC−
Shielding gasAr

Classification and approvals

Classification

AWS class~ER 307
EN ISO classW 18 8 Mn

Approvals

  • SEPRO, DB
According to the Gedik 2023 catalogue; validity is confirmed with the order

Composition and properties

Chemical composition of the wire

C0.08
Cr19.2
Mn7.00
Ni9.00
Si0.90
Values in mass %.

Mechanical properties

Yield strength (Rp0.2)min. 370 MPa
Tensile strength (Rm)580–750 MPa
Elongation (A5)min. 30 %
Impact energy (KV)min. 63 J (20 °C)

How to weld

Process

ShieldingRequires shielding gas
FERVEO guidance
By problem
Dissimilar metalsStainless steel and dissimilar metalsCorrosion-resistant alloys
Alternatives in the catalogue
Same class
same EN ISO designation
ProductClassRmKVAvailability
DT-1.4370 TIGDratecW 18 8 Mn650 MPa80 JTo order · price and lead time in the quote