Gedik · Stainless steels
ELOX RS 307 — ~E307-26
covered electrode · stick electroderutile coating
Choose the size
- Ø 3.2 × 350 mm≈ 5 kg
- Ø 4 × 350 mm≈ 5 kg
To order · price and lead time in the quote
We reply within 1 working day.
Which filler joins two different metals?With this product's data: 307
SuitableFN 0.0 (WRC-1992)
- Fully austenitic with manganese: tolerates no ferrite (307 type).
Maximum dilution with this filler: 45.5 %
Calculated with: filler 307 — this product · dilution 30 % typical of 111, equal shares of each metal
See the full calculation →Field of application
- For high-strength alloy and non-alloy steels, heat-resisting and stainless steels, 14 % Mn steels and difficult-to-weld steels
- Joining and surfacing of dissimilar metals
- Electrode with a rutile covering; the weld metal is austenitic, resistant to thermal shock and remains tough down to -100 °C
- Redrying is required for at least 2 hours at 120 °C to 200 °C
| Positions | PA flat PB horizontal-vertical PC horizontal PD horizontal-overhead PE overhead PF vertical-up |
|---|---|
| Polarity | DC+ |
Classification and approvals
Classification
| AWS class | ~E307-26 |
|---|---|
| EN ISO class | E Z 18 9 MnMo R 53 |
Approvals
- TSE, CE, SEPRO
According to the Gedik 2023 catalogue; validity is confirmed with the order
Composition and properties
Chemical composition of the weld metal
| C | 0.07 |
|---|---|
| Cr | 19.0 |
| Mn | 5.60 |
| Mo | 0.75 |
| Ni | 8.50 |
| Si | 0.90 |
Values in mass %.
Mechanical properties
| Yield strength (Rp0.2) | min. 400 MPa |
|---|---|
| Tensile strength (Rm) | 590–700 MPa |
| Elongation (A5) | min. 35 % |
| Impact energy (KV) | min. 47 J (20 °C) |
How to weld
Treatment and preparation
| Re-drying | 120–200 °C / min. 2 h |
|---|
Welding parameters by diameter
| Ø | Length | Current |
|---|---|---|
| 3.2 mm | 350 mm | 110–150 A |
| 4 mm | 350 mm | 140–180 A |
FERVEO guidance
By problem
Dissimilar metalsStainless steel and dissimilar metalsCorrosion-resistant alloys