Gedik · Stainless steels

ELOX R 316L-17 — E316L-17
Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 4 mm
FT-ELOX-R-316L-17-EN
rev. 2 · 2026-11-21
page 1 / 2
rev. 2 · 2026-11-21
page 1 / 2
Type
covered electrode · stick electrode
Standard
E316L-17
Diameters
Ø 2.5 – 4 mm
Sizes and packaging
Ø
Length
Current
Code
2.5 mm
250 mm
50–90 A
GDK-3010101268
3.2 mm
350 mm
80–120 A
GDK-3010101273
4 mm
350 mm
110–160 A
GDK-3010101278
Application
- Low-carbon electrode with a rutile covering for tanks, pipes and equipment made of low-carbon Cr-Ni-Mo steels used in the food, textile, chemical and paint industries
- The weld metal is resistant to acids and corrosion
- Suitable for temperatures up to 400 °C
- Redrying is required for at least 2 hours at 120 °C to 200 °C
Classification
AWS class
E316L-17
EN ISO class
E 19 12 3 L R 32
Approvals
TSE, CE, SEPRO
Validity is confirmed with the order
Chemical composition of the weld metal
C
Cr
Mn
Mo
Ni
Si
0.03
19.0
0.90
2.60
11.5
0.80
Values in mass %.
Base metals
EN: X10CrNiMoNb 18 12 · X2CrNiMo 18 14 3 · X5CrNiMo 17 13 3 · X2CrNiMo 17 13 2 · X2CrNiMoN 17 12 2 · X5CrNiMo 17 12 2 · X5CrNiMoTi 17 12 2 · X6CrNiMoNb 17 12 2 · X2CrNiMoN 17 13 3
AISI: 316Cb · 316 · 316L · 316Ti
Mechanical properties
Yield strength (Rp0.2)
min. 355 MPa
Tensile strength (Rm)
540–670 MPa
Elongation (A5)
min. 30 %
Impact energy (KV)
min. 47 J (20 °C)
Service temperature
max. 400 °C
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-ELOX-R-316L-17-EN · rev. 2 · page 1 / 2
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Gedik 2023 catalogue