Gedik · Stainless steels

ELOX R 312 — ~E 312-16
Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 4 mm
FT-ELOX-R-312-EN
rev. 2 · 2026-11-21
page 1 / 2
rev. 2 · 2026-11-21
page 1 / 2
Type
covered electrode · stick electrode
Standard
~E 312-16
Diameters
Ø 2.5 – 4 mm
Sizes and packaging
Ø
Length
Current
Code
2.5 mm
250 mm
50–80 A
GDK-3010101208
3.2 mm
300 mm
80–110 A
GDK-3010101213
3.2 mm
350 mm
80–110 A
GDK-3010101218
4 mm
350 mm
110–160 A
GDK-3010101223
Application
- For high-strength alloy and non-alloy steels and Cr and Mn steels; joining tool steels and dissimilar steels; wear-resistant surfacing in the repair of parts such as shafts and gears
- The weld metal is resistant to cracking, wear and rusting
- Redrying is required for at least 2 hours at 120 °C to 200 °C
Classification
AWS class
~E 312-16
EN ISO class
E 29 9 R 12
Approvals
TSE, CE, ABS, BV, SEPRO
Validity is confirmed with the order
Chemical composition of the weld metal
C
Cr
Mn
Ni
Si
0.12
30.0
0.80
10.5
1.00
Values in mass %.
Mechanical properties
Yield strength (Rp0.2)
min. 490 MPa
Tensile strength (Rm)
700–830 MPa
Elongation (A5)
min. 20 %
Impact energy (KV)
min. 24 J (20 °C)
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-ELOX-R-312-EN · rev. 2 · page 1 / 2
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Gedik 2023 catalogue