Download PDF
← Technical datasheet
Gedik · Stainless steels
FERVEO

ELOX R 309 MoL — E 309LMo-16

Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 4 mm
FT-ELOX-R-309-MOL-EN
rev. 2 · 2026-11-21
page 1 / 2
Type
covered electrode · stick electrode
Standard
E 309LMo-16
Diameters
Ø 2.5 – 4 mm
Sizes and packaging
Ø
Length
Current
Code
2.5 mm
250 mm
60–90 A
GDK-3010101098
3.2 mm
350 mm
80–120 A
GDK-3010101103
4 mm
350 mm
100–160 A
GDK-3010101108
Application
  • For higher-strength non-alloy and alloy steels
  • For heat-resisting steels
  • For pressure vessels for high-temperature service and for similar ferritic and austenitic steels
  • For corrosion-resisting and heat-resisting steels, build-up, surfacing and buffer layers
  • The weld metal has a higher ferrite content and higher crack resistance
  • Redrying is required for at least 2 hours at 120 °C to 200 °C
Classification
AWS class
E 309LMo-16
EN ISO class
E 23 12 2 L R 32
Approvals

TSE, CE, SEPRO

Validity is confirmed with the order

Chemical composition of the weld metal
C
Cr
Mn
Mo
Ni
Si
< 0.03
23.0
0.80
2.80
13.0
0.70
Values in mass %.
Base metals

High strength unalloyed and alloyed steels · heat resistant steels · ferritic and austenitic steels

Mechanical properties
Yield strength (Rp0.2)
530 MPa
Tensile strength (Rm)
700 MPa
Elongation (A5)
35 %
Impact energy (KV)
min. 55 J (20 °C)
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-ELOX-R-309-MOL-EN · rev. 2 · page 1 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Gedik 2023 catalogue

Gedik · Stainless steels
FERVEO

ELOX R 309 MoL — E 309LMo-16

Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 4 mm
FT-ELOX-R-309-MOL-EN
rev. 2 · 2026-11-21
page 2 / 2
Process
Polarity
DC+/AC
Positions
PA flat · PB horizontal-vertical · PC horizontal · PD horizontal-overhead · PE overhead · PF vertical-up
Treatment and preparation
Re-drying
120–200 °C / min. 2 h
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-ELOX-R-309-MOL-EN · rev. 2 · page 2 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Gedik 2023 catalogue