Download PDF
← Technical datasheet
Gedik · Stainless steels
FERVEO

ELOX R 309 L — E309L-16

Technical datasheet · covered electrode · stick electrode · Ø 2 – 4 mm
FT-ELOX-R-309-L-EN
rev. 2 · 2026-11-21
page 1 / 2
Type
covered electrode · stick electrode
Standard
E309L-16
Diameters
Ø 2 – 4 mm
Sizes and packaging
Ø
Length
Current
Code
2 mm
250 mm
50–85 A
GDK-3010101058
2.5 mm
250 mm
60–90 A
GDK-3010101063
3.2 mm
350 mm
80–120 A
GDK-3010101073
4 mm
350 mm
100–160 A
GDK-3010101078
Application
  • For similar austenitic stainless steels and dissimilar metals; buffer layers on non-alloy and low-alloy steels before build-up or surfacing with any stainless electrode; joining corrosion-resistant stainless steel to non-alloy or low-alloy steels; clad steels
  • Good crack resistance on difficult-to-weld steels
  • The weld metal has a high ferrite content
  • Redrying is required for at least 2 hours at 120 °C to 200 °C
Classification
AWS class
E309L-16
EN ISO class
E 23 12 L R 32
Approvals

TSE, CE, BV, ABS, SEPRO, RCB, DNV-GL

Validity is confirmed with the order

Chemical composition of the weld metal
C
Cr
Mn
Ni
Si
0.03
23.0
0.80
12.6
0.80
Values in mass %.
Base metals

High-strength unalloyed and heat-treatable steels · ferritic Cr and austenitic CrNi steels · austenitic Mn steels · Unalloyed tempered steels · tool steels · hard manganese steels · ferritic chromium steels · austenitic nickel-chromium steels · hard-to-weld steels

Mechanical properties
Yield strength (Rp0.2)
min. 440 MPa
Tensile strength (Rm)
540–720 MPa
Elongation (A5)
min. 30 %
Impact energy (KV)
min. 47 J (20 °C)
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-ELOX-R-309-L-EN · rev. 2 · page 1 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Gedik 2023 catalogue

Gedik · Stainless steels
FERVEO

ELOX R 309 L — E309L-16

Technical datasheet · covered electrode · stick electrode · Ø 2 – 4 mm
FT-ELOX-R-309-L-EN
rev. 2 · 2026-11-21
page 2 / 2
Process
Polarity
DC+/AC
Positions
PA flat · PB horizontal-vertical · PC horizontal · PD horizontal-overhead · PE overhead · PF vertical-up
Treatment and preparation
Re-drying
120–200 °C / min. 2 h
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-ELOX-R-309-L-EN · rev. 2 · page 2 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Gedik 2023 catalogue