We open on 1 January 2027. Until then we are not accepting registrations or requests.
Datasheetas published in the maker's catalogueCross-referencesacross makers and AWS / EN ISO classesDeliverySpain and PortugalESPTEN
FERVEO
Basket
Gedik · Stainless steels

ELOX R 308 L-17 — E 308 L- 17

covered electrode · stick electroderutile coating

Choose the size

  • Ø 2.5 × 250 mm
    ≈ 5 kg
  • Ø 3.2 × 350 mm
    ≈ 5 kg
  • Ø 4 × 350 mm
    ≈ 5 kg
To order · price and lead time in the quote

We reply within 1 working day.

How much filler metal do I need?With this product's data: 111 · η 0.55–0.65
Thickness of the plates to be joinedref. 1.3: 3 < t ≤ 10
Sum of all identical welds

7.02–11.21 kg

of ELOX R 308 L-17 for 10 m of weld

3 packs of ≈ 5 kg

Calculated with: η 0.55–0.65: typical value for process 111 · preparation per EN ISO 9692-1 · EN ISO 5817 level C

See the full calculation →
Which filler joins two different metals?With this product's data: 308L

Not recommendedFN — (WRC-1992)

  • Martensite in the weld: risk of cracking. Use a richer filler (309L, 312) or lower the dilution.

Maximum dilution with this filler: 11.5 %

Calculated with: filler 308L — this product · dilution 30 % typical of 111, equal shares of each metal

See the full calculation →

Field of application

  • Low-carbon electrode with a rutile covering for the chemical, petrochemical and food industries, for welding similar steels, including higher-carbon grades, and ferritic 13 % Cr steels
  • The weld metal is resistant to corrosion and cracking
  • Service temperatures up to +350 °C
  • Redrying is required for at least 2 hours at 120 °C to 200 °C

Base metals

X2CrNi 19 11X5CrNi 18 10X6CrNiTi 18 10X6CrNiNb 18 10X10CrNiNb 18 10X12CrNi 18 8304 L304304 LN321347302
PositionsPA flat PB horizontal-vertical PC horizontal PD horizontal-overhead PE overhead PF vertical-up
PolarityDC+/AC

Classification and approvals

Classification

AWS classE 308 L- 17
EN ISO classE 19 9 L R 32

Approvals

  • TSE, CE, SEPRO
According to the Gedik 2023 catalogue; validity is confirmed with the order

Composition and properties

Chemical composition of the weld metal

C0.03
Cr20.0
Mn0.90
Ni10.5
Si0.80
Values in mass %.

Mechanical properties

Yield strength (Rp0.2)min. 355 MPa
Tensile strength (Rm)520–660 MPa
Elongation (A5)min. 35 %
Impact energy (KV)min. 47 J (20 °C)
Service temperaturemax. 350 °C

How to weld

Treatment and preparation

Re-drying120–200 °C / min. 2 h

Welding parameters by diameter

ØLengthCurrent
2.5 mm250 mm50–90 A
3.2 mm350 mm80–120 A
4 mm350 mm110–160 A
FERVEO guidance
By problem
Corrosion-resistant alloys
Alternatives in the catalogue
Same class
same EN ISO designation
ProductClassRmKVAvailability
ELOX R 308 LGedikE 19 9 L R 32520–660 MPamin. 47 J (20 °C)To order · price and lead time in the quote