Gedik · Stainless steels

ELOX B 430 Mo — E Z 17 Mo B 22
Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 4 mm
FT-ELOX-B-430-MO-EN
rev. 2 · 2026-11-21
page 1 / 2
rev. 2 · 2026-11-21
page 1 / 2
Type
covered electrode · stick electrode
Standard
E Z 17 Mo B 22
Diameters
Ø 2.5 – 4 mm
Application
- Electrode with an alloyed core wire and a basic covering, with good welding characteristics in all positions except vertical-down
- Mainly for corrosion-resistant and wear-resistant hardfacing
- Preferably for the sealing faces of gas, water and steam valves
- After machining, at least two layers of build-up should remain on the surface
- The weld metal retains its hardness up to 500 °C
- Seawater-resistant; resistant to scaling up to 900 °C
- Preheating as required by the parent material; 100 °C to 200 °C is generally sufficient (250 °C to 400 °C for joining)
- Annealing at 650 °C to 750 °C may be carried out to improve the toughness of the weld metal and the transition zone
Classification
EN ISO class
E Z 17 Mo B 22
Approvals
TSE, CE, SEPRO
Validity is confirmed with the order
Chemical composition of the weld metal
C
Cr
Mn
Mo
Si
0.20
17.0
0.50
1.20
0.50
Values in mass %.
Base metals
GS-C 25 · X22CrNi 17 · 41Cr4
Mechanical properties
Yield strength (Rp0.2)
min. 490 MPa
Tensile strength (Rm)
650–750 MPa
Elongation (A5)
min. 15 %
Hardness
as welded
approx. 400 HB
after annealing: 750 °C / 2 h / furnace
approx. 250 HB
Process
Polarity
DC+
Positions
PA flat · PB horizontal-vertical · PC horizontal · PD horizontal-overhead · PE overhead · PF vertical-up
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-ELOX-B-430-MO-EN · rev. 2 · page 1 / 2
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Gedik 2023 catalogue