We open on 1 January 2027. Until then we are not accepting registrations or requests.
Datasheetas published in the maker's catalogueCross-referencesacross makers and AWS / EN ISO classesDeliverySpain and PortugalESPTEN
FERVEO
Basket
Gedik · Stainless steels

ELOX B 385 — E 385 -15

covered electrode · stick electrodebasic coating

Choose the size

  • Ø 2.5 × 250 mm
    ≈ 5 kg
  • Ø 3.2 × 350 mm
    ≈ 5 kg
  • Ø 4 × 350 mm
    ≈ 5 kg
To order · price and lead time in the quote

We reply within 1 working day.

How much filler metal do I need?With this product's data: 111 · η 0.55–0.65
Thickness of the plates to be joinedref. 1.3: 3 < t ≤ 10
Sum of all identical welds

7.11–11.36 kg

of ELOX B 385 for 10 m of weld

3 packs of ≈ 5 kg

Calculated with: η 0.55–0.65: typical value for process 111 · preparation per EN ISO 9692-1 · EN ISO 5817 level C

See the full calculation →
Which filler joins two different metals?With this product's data: 385

Not recommendedFN — (WRC-1992)

  • Fully austenitic weld, as expected from a superaustenitic filler (type 385).
  • Superaustenitic filler (type 385) with carbon steel: not recommended for this joint; use 309L or 309LMo.

Maximum dilution with this filler: 74.5 %

Calculated with: filler 385 — this product · dilution 30 % typical of 111, equal shares of each metal

See the full calculation →

Field of application

  • Special electrode with an alloyed core wire and a basic covering for corrosion-resisting high-molybdenum CrNi steels
  • Recommended for highly corrosive media
  • Besides its very good resistance to stress corrosion cracking and crevice corrosion, the weld metal has high resistance to pitting corrosion
  • Particularly recommended for steels containing up to 5 % molybdenum

Base metals

EN & DIN:
X5NiCrMoCuNb 20 18X5NiCrMoCuTi 20 18X2NiCrMoCu 25 20 5X5NiCrMoCuNb 22 18G-X7CrNiMoCuNb 18 18G-X7NiCrMoCuNb 25 20
AISI:
307307L904L
PositionsPA flat PB horizontal-vertical PC horizontal PD horizontal-overhead PE overhead PF vertical-up
PolarityDC+

Classification and approvals

Classification

AWS classE 385 -15
EN ISO classE Z 20 25 5 Cu N L B 22

Approvals

  • TSE, CE, SEPRO
According to the Gedik 2023 catalogue; validity is confirmed with the order

Composition and properties

Chemical composition of the weld metal

C< 0.025
Cr22.0
Cu2.20
Mn2.20
Mo3.50
Nb0.35
Ni25.0
Si0.40
Values in mass %.

Mechanical properties

Yield strength (Rp0.2)min. 380 MPa
Tensile strength (Rm)600–700 MPa
Elongation (A5)min. 35 %
Impact energy (KV)80 J (20 °C)

How to weld

Welding parameters by diameter

ØLengthCurrent
2.5 mm250 mm50–90 A
3.2 mm350 mm80–120 A
4 mm350 mm110–150 A
FERVEO guidance
By problem
Corrosion-resistant alloys