Gedik · Stainless steels

ELOX B 347 — E 347-15
Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 4 mm
FT-ELOX-B-347-EN
rev. 2 · 2026-11-21
page 1 / 2
rev. 2 · 2026-11-21
page 1 / 2
Type
covered electrode · stick electrode
Standard
E 347-15
Diameters
Ø 2.5 – 4 mm
Sizes and packaging
Ø
Length
Current
Code
2.5 mm
250 mm
60–80 A
GDK-3010101413
3.2 mm
350 mm
80–120 A
GDK-3010101418
4 mm
350 mm
100–150 A
GDK-3010101423
Application
- Stabilised austenitic electrode with an alloyed core wire and a basic covering, for all industries in which similar steels and ferritic 13 % chromium steels are welded
- The weld metal has high ductility, so the electrode is preferred for welding thick sections
- Very good positional welding properties; good low-temperature ductility down to -196 °C
- Resistant to intergranular corrosion up to 400 °C
- The weld metal requires no preheating or post-weld heat treatment
Classification
AWS class
E 347-15
EN ISO class
E 19 9 Nb B 22
Approvals
TSE, CE, SEPRO
Validity is confirmed with the order
Chemical composition of the weld metal
C
Cr
Mn
Nb
Ni
Si
0.04
19.8
1.40
0.40
10.2
0.45
Values in mass %.
Base metals
EN & DIN: X6CrNiNb 18 10 · X6CrNiTi 18 10 · X5CrNi 18 10 · X2CrNiN 18 10 · X2CrNi 19 11 · G-X5CrNiNb 19 10 · G-X10CrNi 18 8
AISI: 347 · 321 · 304 · 304LN · 302
ASTM: A296 Gr.CF8C · A157 Gr C9 · A320 Gr B 8C & D
Mechanical properties
Yield strength (Rp0.2)
min. 400 MPa
Tensile strength (Rm)
600–740 MPa
Elongation (A5)
min. 30 %
Impact energy (KV)
min. 55 J (20 °C)
Service temperature
max. 400 °C
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-ELOX-B-347-EN · rev. 2 · page 1 / 2
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Gedik 2023 catalogue