Gedik · Stainless steels
ELOX B 318 — E 318-15
covered electrode · stick electrodebasic coating
Choose the size
- Ø 2.5 × 250 mm≈ 5 kg
- Ø 3.2 × 350 mm≈ 5 kg
- Ø 4 × 350 mm≈ 5 kg
To order · price and lead time in the quote
We reply within 1 working day.
How much filler metal do I need?With this product's data: 111 · η 0.55–0.65
Thickness of the plates to be joinedref. 1.3: 3 < t ≤ 10
Sum of all identical welds
7.11–11.36 kg
of ELOX B 318 for 10 m of weld
3 packs of ≈ 5 kg
Calculated with: η 0.55–0.65: typical value for process 111 · preparation per EN ISO 9692-1 · EN ISO 5817 level C
See the full calculation →Field of application
Stabilised austenitic electrode with an alloyed core wire and a basic covering. Intended for all industries in which matching steels, including ferritic 13 % chromium steels, are welded. The weld metal has high ductility, so the electrode is preferred for thick sections. Very good positional welding properties. Resistant to intergranular corrosion up to 400 °C. The weld metal requires no preheating or post-weld heat treatment
Base metals
EN:
X6CrNiMoTi 17 12 2X6CrNiMoNb 1 12 2X5CrNiMo 17 13 2G-XCrNiMo 18 10X10CrNiMoNb 18 12X5CrNiMo 17 13 3G-X10CrNiMo 18 10G-X10CrNiNb 18 10
AISI:
316Ti316Cb316L
| Positions | PA flat PB horizontal-vertical PC horizontal PD horizontal-overhead PE overhead PF vertical-up |
|---|---|
| Polarity | DC+ |
Classification and approvals
Classification
| AWS class | E 318-15 |
|---|---|
| EN ISO class | E 19 12 3 Nb B 22 |
Approvals
- TSE, CE, SEPRO
According to the Gedik 2023 catalogue; validity is confirmed with the order
Composition and properties
Chemical composition of the weld metal
| C | 0.04 |
|---|---|
| Cr | 20.0 |
| Mn | 1.45 |
| Mo | 2.75 |
| Nb | present |
| Ni | 11.5 |
| Si | 0.45 |
Values in mass %.
Mechanical properties
| Yield strength (Rp0.2) | min. 390 MPa |
|---|---|
| Tensile strength (Rm) | 590–730 MPa |
| Elongation (A5) | min. 30 % |
| Impact energy (KV) | min. 55 J (20 °C) |
| Service temperature | max. 400 °C |
How to weld
Treatment and preparation
| Pre-heating | not required |
|---|---|
| Post-weld heat treatment | not required |
Welding parameters by diameter
| Ø | Length | Current |
|---|---|---|
| 2.5 mm | 250 mm | 60–80 A |
| 3.2 mm | 350 mm | 80–110 A |
| 4 mm | 350 mm | 110–150 A |
FERVEO guidance
By problem
Corrosion-resistant alloys