Download PDF
← Technical datasheet
Gedik · Stainless steels
FERVEO

ELOX B 316 L — E 316 L-15

Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 4 mm
FT-ELOX-B-316-L-EN
rev. 2 · 2026-11-21
page 1 / 2
Type
covered electrode · stick electrode
Standard
E 316 L-15
Diameters
Ø 2.5 – 4 mm
Sizes and packaging
Ø
Length
Current
Code
2.5 mm
250 mm
60–80 A
GDK-3010101283
3.2 mm
350 mm
80–110 A
GDK-3010101288
4 mm
350 mm
110–140 A
GDK-3010101293
Application
  • Low-carbon austenitic electrode with an alloyed core wire and a basic covering, for all industries in which matching steels, including higher-carbon grades, and ferritic 13 % Cr steels are welded. The weld metal has high ductility, so the electrode is preferred for welding thick sections. Very good positional welding properties. Good low-temperature ductility down to -196 °C. Resistant to intergranular corrosion up to 400 °C
  • The weld metal requires no preheating or post-weld heat treatment
Classification
AWS class
E 316 L-15
EN ISO class
E 19 12 3 L B 22
Approvals

TSE, CE, SEPRO

Validity is confirmed with the order

Chemical composition of the weld metal
C
Cr
Mn
Mo
Ni
Si
0.03
18.9
1.35
2.75
11.5
0.45
Values in mass %.
Base metals

EN: X10CrNiMoNb 18 12 · X2CrNiMo 18 14 3 · X5CrNiMo 17 13 3 · X2CrNiMo 17 13 2 · X2CrNiMoN 17 12 2 · X5CrNiMo 17 12 2 · X5CrNiMoTi 17 12 2 · X6CrNiMoNb 17 12 2 · X2CrNiMoN 17 13 3

AISI: 316Cb · 316 · 316L · 316Ti

Mechanical properties
Yield strength (Rp0.2)
min. 360 MPa
Tensile strength (Rm)
550–700 MPa
Elongation (A5)
min. 35 %
Impact energy (KV)
min. 55 J (20 °C)
Service temperature
max. 400 °C
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-ELOX-B-316-L-EN · rev. 2 · page 1 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Gedik 2023 catalogue

Gedik · Stainless steels
FERVEO

ELOX B 316 L — E 316 L-15

Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 4 mm
FT-ELOX-B-316-L-EN
rev. 2 · 2026-11-21
page 2 / 2
Process
Polarity
DC+
Positions
PA flat · PB horizontal-vertical · PC horizontal · PD horizontal-overhead · PE overhead · PF vertical-up
Treatment and preparation
Pre-heating
not required
Post-weld heat treatment
not required
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-ELOX-B-316-L-EN · rev. 2 · page 2 / 2

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Gedik 2023 catalogue