We open on 1 January 2027. Until then we are not accepting registrations or requests.
Datasheetas published in the maker's catalogueCross-referencesacross makers and AWS / EN ISO classesDeliverySpain and PortugalESPTEN
FERVEO
Basket
Gedik · Stainless steels

ELOX B 310 — ~E 310-15

covered electrode · stick electrodebasic coating

Choose the size

  • Ø 2.5 × 250 mm
    ≈ 5 kg
  • Ø 3.2 × 300 mm
    ≈ 5 kg
  • Ø 3.2 × 350 mm
    ≈ 5 kg
  • Ø 4 × 350 mm
    ≈ 5 kg
To order · price and lead time in the quote

We reply within 1 working day.

How much filler metal do I need?With this product's data: 111 · η 0.55–0.65
Thickness of the plates to be joinedref. 1.3: 3 < t ≤ 10
Sum of all identical welds

7.02–11.21 kg

of ELOX B 310 for 10 m of weld

3 packs of ≈ 5 kg

Calculated with: η 0.55–0.65: typical value for process 111 · preparation per EN ISO 9692-1 · EN ISO 5817 level C

See the full calculation →
Which filler joins two different metals?With this product's data: 310

Not recommendedFN — (WRC-1992)

  • Fully austenitic: sensitive to hot cracking.
  • Filler 310 gives a fully austenitic weld: with carbon-steel dilution it is prone to hot cracking. For this joint use 309L or 312.

Calculated with: filler 310 — this product · dilution 30 % typical of 111, equal shares of each metal

See the full calculation →

Field of application

  • For austenitic CrNi steels, ferritic CrNiAl alloy steels and heat-resisting rolled, forged and cast steels used in the ceramics and petrochemical industries and in industrial furnaces, boilers and chimneys
  • Service temperatures of the weld metal: -196 °C up to +1200 °C

Base metals

X15CrNiSi 25 20X12CrNi 25 21X15CrNiSi 20 12G-X 15CrNi 25 20G-X 40CrNi 25 21G-X40CrNiSi22 9X10CrAl 18X10CrAl 24G-X40CrSi 17AISI 305310314
PositionsPA flat PB horizontal-vertical PC horizontal PD horizontal-overhead PE overhead PF vertical-up
PolarityDC+

Classification and approvals

Classification

AWS class~E 310-15
EN ISO classE 25 20 B 22

Approvals

  • TSE, CE, SEPRO
According to the Gedik 2023 catalogue; validity is confirmed with the order

Composition and properties

Chemical composition of the weld metal

C0.12
Cr25.0
Mn3.00
Ni20.5
Si0.90
Values in mass %.

Mechanical properties

Yield strength (Rp0.2)min. 355 MPa
Tensile strength (Rm)560–690 MPa
Elongation (A5)min. 25 %
Impact energy (KV)100 J (20 °C)
Service temperaturemax. 1200 °C

How to weld

Welding parameters by diameter

ØLengthCurrent
2.5 mm250 mm50–80 A
3.2 mm300 mm80–110 A
3.2 mm350 mm80–110 A
4 mm350 mm110–140 A
FERVEO guidance
By problem
Corrosion-resistant alloys
Alternatives in the catalogue
Same class
same EN ISO designation
ProductClassRmKVAvailability
FINOX 4842 BKjellbergE 25 20 B 22> 550 MPa> 80 J (room temperature)To order · price and lead time in the quote