We open on 1 January 2027. Until then we are not accepting registrations or requests.
Datasheetas published in the maker's catalogueCross-referencesacross makers and AWS / EN ISO classesDeliverySpain and PortugalESPTEN
FERVEO
Basket
Gedik · Stainless steels

ELOX B 308 L — E 308 L-15

covered electrode · stick electrodebasic coating

Choose the size

  • Ø 2.5 × 250 mm
    ≈ 5 kg
  • Ø 3.2 × 350 mm
    ≈ 5 kg
  • Ø 4 × 350 mm
    ≈ 5 kg
To order · price and lead time in the quote

We reply within 1 working day.

How much filler metal do I need?With this product's data: 111 · η 0.55–0.65
Thickness of the plates to be joinedref. 1.3: 3 < t ≤ 10
Sum of all identical welds

7.02–11.21 kg

of ELOX B 308 L for 10 m of weld

3 packs of ≈ 5 kg

Calculated with: η 0.55–0.65: typical value for process 111 · preparation per EN ISO 9692-1 · EN ISO 5817 level C

See the full calculation →
Which filler joins two different metals?With this product's data: 308L

Not recommendedFN — (WRC-1992)

  • Martensite in the weld: risk of cracking. Use a richer filler (309L, 312) or lower the dilution.

Maximum dilution with this filler: 11.5 %

Calculated with: filler 308L — this product · dilution 30 % typical of 111, equal shares of each metal

See the full calculation →

Field of application

  • Low-carbon austenitic electrode with an alloyed core wire and a basic covering, for all industries in which similar steels, including higher-carbon grades, and ferritic 13 % Cr steels are welded
  • The weld metal has high ductility, so the electrode is preferred for welding thick sections
  • Very good positional welding properties
  • Good low-temperature ductility down to -196 °C
  • Resistant to intergranular corrosion up to 350 °C
  • The weld metal requires no preheating or post-weld heat treatment

Base metals

X2CrNi 19 11X5CrNi 18 10X6CrNiTi 18 10X6CrNiNb 18 10X 10 CrNiNb 18 10X2CrNiN 18 10X12CrNi 18 8304L304304 LN321347302320 B 8 C & D
PositionsPA flat PB horizontal-vertical PC horizontal PD horizontal-overhead PE overhead PF vertical-up
PolarityDC+

Classification and approvals

Classification

AWS classE 308 L-15
EN ISO classE 19 9 L B 22

Approvals

  • TSE, CE, SEPRO
According to the Gedik 2023 catalogue; validity is confirmed with the order

Composition and properties

Chemical composition of the weld metal

C0.02
Cr19.7
Mn1.20
Ni10.3
Si0.45
Values in mass %.

Mechanical properties

Yield strength (Rp0.2)min. 370 MPa
Tensile strength (Rm)520–660 MPa
Elongation (A5)min. 40 %
Impact energy (KV)90 J (20 °C)

How to weld

Treatment and preparation

Pre-heatingnot required
Post-weld heat treatmentnot required

Welding parameters by diameter

ØLengthCurrent
2.5 mm250 mm50–80 A
3.2 mm350 mm80–110 A
4 mm350 mm110–140 A
FERVEO guidance
By problem
Corrosion-resistant alloys