Gedik · Stainless steels

ELOX B 308 H — E 308 H-15
Technical datasheet · covered electrode · stick electrode · Ø 2.5 – 4 mm
FT-ELOX-B-308-H-EN
rev. 2 · 2026-11-21
page 1 / 2
rev. 2 · 2026-11-21
page 1 / 2
Type
covered electrode · stick electrode
Standard
E 308 H-15
Diameters
Ø 2.5 – 4 mm
Sizes and packaging
Ø
Length
Current
Code
2.5 mm
250 mm
60–90 A
GDK-3010101598
3.2 mm
350 mm
100–130 A
GDK-3010101603
4 mm
350 mm
100–160 A
GDK-3010101608
Application
- Electrode with a basic covering for welding type 304H steel and similar applications where creep strength is required
- Same as E308, except that the carbon content is restricted to the range 0.04 to 0.08
- Provides higher tensile strength and creep strength at elevated temperatures
- The ferrite content of the weld metal is normally set at 5 FN to minimise sigma-phase embrittlement in high-temperature service
Classification
AWS class
E 308 H-15
EN ISO class
E 19 9 H B 22
Approvals
CE, SEPRO
Validity is confirmed with the order
Chemical composition of the weld metal
C
Cr
Mn
Ni
Si
0.05
19.0
1.40
10.5
0.60
Values in mass %.
Base metals
301 · 302 · 304 · 304H · 305 · 321
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-ELOX-B-308-H-EN · rev. 2 · page 1 / 2
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Gedik 2023 catalogue