We open on 1 January 2027. Until then we are not accepting registrations or requests.
Datasheetas published in the maker's catalogueCross-referencesacross makers and AWS / EN ISO classesDeliverySpain and PortugalESPTEN
FERVEO
Basket
Gedik · Duplex stainless steels

ELOX B 2594 — E 2594 - 15

covered electrode · stick electrodebasic coating

Choose the size

  • Ø 2.5 × 250 mm
    ≈ 5 kg
  • Ø 3.2 × 300 mm
    ≈ 5 kg
To order · price and lead time in the quote

We reply within 1 working day.

How much filler metal do I need?With this product's data: 111 · η 0.55–0.65
Thickness of the plates to be joinedref. 1.3: 3 < t ≤ 10
Sum of all identical welds

6.93–11.07 kg

of ELOX B 2594 for 10 m of weld

3 packs of ≈ 5 kg

Calculated with: η 0.55–0.65: typical value for process 111 · preparation per EN ISO 9692-1 · EN ISO 5817 level C

See the full calculation →
Which filler joins two different metals?With this product's data: 2594

SuitableFN 18.6 (WRC-1992)

✓

Maximum dilution with this filler: 54.5 %

Calculated with: filler 2594 — this product · dilution 30 % typical of 111, equal shares of each metal

See the full calculation →

Field of application

  • Electrode with a basic covering, used especially for welding duplex stainless steels. It gives high yield strength and tensile strength, and the weld metal is resistant to pitting corrosion
  • Redrying is required for at least 2 hours at 250 °C to 300 °C

Base metals

1.4410X2CrNiMoN 25-7-41.4501X2CrNiMoCuWN 25-7-41.4507X2CrNiMoCuN 25-6-3UNS S32750S32760S32550
PositionsPA flat PB horizontal-vertical PC horizontal PD horizontal-overhead PE overhead PF vertical-up
PolarityDC+

Classification and approvals

Classification

AWS classE 2594 - 15
EN ISO classE 25 9 4 N L B 42

Approvals

  • CE, SEPRO
According to the Gedik 2023 catalogue; validity is confirmed with the order

Composition and properties

Chemical composition of the weld metal

C0.035
N0.25
Cr24.0
Mn1.45
Mo3.80
Ni8.60
Si0.35
Values in mass %.

Mechanical properties

Yield strength (Rp0.2)min. 550 MPa
Tensile strength (Rm)min. 760 MPa
Elongation (A5)min. 18 %
Impact energy (KV)min. 47 J (20 °C)

How to weld

Treatment and preparation

Re-drying250–300 °C / min. 2 h

Welding parameters by diameter

ØLengthCurrent
2.5 mm250 mm60–80 A
3.2 mm300 mm80–120 A
FERVEO guidance
By problem
Corrosion-resistant alloys