Download PDF
← Technical datasheet
Gedik · Hardfacing
FERVEO

ELHARD 700 — E Fe 2

Technical datasheet · covered electrode · stick electrode · Ø 3.2 – 5 mm
FT-ELHARD-700-EN
rev. 2 · 2026-11-21
page 1 / 1
Type
covered electrode · stick electrode
Standard
E Fe 2
Diameters
Ø 3.2 – 5 mm
Sizes and packaging
Ø
Length
Current
Code
3.2 mm
350 mm
100–150 A
GDK-3010101861
4 mm
450 mm
140–180 A
GDK-3010101867
5 mm
450 mm
170–210 A
GDK-3010101870
Application
  • Abrasion-resistant hardfacing of parts used in the sand, brick and mineral-processing industries, and build-up of worn areas of austenitic manganese steels
  • Preheating is generally not required
  • The weld metal also withstands moderate impact
  • Redrying of the electrodes before use at 300 °C to 350 °C for at least 2 h is recommended
  • The weld metal does not crack
Classification
EN 14700 class
E Fe 2
DIN 8555 class
~E6-UM-60
Approvals

SEPRO

Validity is confirmed with the order

Chemical composition of the weld metal
C
V
Cr
Mn
Mo
Si
0.50
0.80
4.70
1.50
0.80
1.20
Values in mass %.
Hardness
60–62 HRC
Process
Polarity
DC+
Treatment and preparation
Re-drying
300–350 °C / 2 h
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-ELHARD-700-EN · rev. 2 · page 1 / 1

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Gedik 2023 catalogue