Download PDF
← Technical datasheet
Gedik · Hardfacing
FERVEO

ELHARD 650 Si — E Fe2

Technical datasheet · covered electrode · stick electrode · Ø 4 – 5 mm
FT-ELHARD-650-SI-EN
rev. 2 · 2026-11-21
page 1 / 1
Type
covered electrode · stick electrode
Standard
E Fe2
Diameters
Ø 4 – 5 mm
Sizes and packaging
Ø
Length
Current
Code
4 mm
450 mm
140–180 A
GDK-3010101855
5 mm
450 mm
170–210 A
GDK-3010101858
Application
  • Resistance to abrasion and shock
  • Suitable for hardfacing worn parts of crushing, drilling, excavating and grinding machines in earthmoving, mining and coal mining
  • The hardness of the weld metal can vary between 57 and 62 HRC depending on the welding current, the number of passes, and the size and chemical composition of the parent material
  • Redrying of the electrodes before use at 300 °C to 350 °C for at least 2 h is recommended
Classification
EN 14700 class
E Fe2
DIN 8555 class
E2-UM-60
Approvals

SEPRO

Validity is confirmed with the order

Chemical composition of the weld metal
C
Cr
Mn
Si
0.70
3.50
0.50
3.50
Values in mass %.
Hardness
57–62 HRC
Process
Polarity
DC+
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-ELHARD-650-SI-EN · rev. 2 · page 1 / 1

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Gedik 2023 catalogue