Download PDF
← Technical datasheet
Gedik · Tool steels
FERVEO

ELHARD 58 — E Fe 4

Technical datasheet · covered electrode · stick electrode · Ø 3.2 – 4 mm
FT-ELHARD-58-EN
rev. 2 · 2026-11-21
page 1 / 1
Type
covered electrode · stick electrode
Standard
E Fe 4
Diameters
Ø 3.2 – 4 mm
Sizes and packaging
Ø
Length
Current
Code
3.2 mm
350 mm
80–110 A
GDK-3010101933
4 mm
350 mm
110–140 A
GDK-3010101936
Application
  • Used for making cutting tools by surfacing on carbon steels, for the repair and manufacture of milling cutters, turning and planing tools, drills, twist drills and saw teeth, for press dies and their bolsters, and for overlays resistant to severe abrasion on excavator teeth, shredding teeth and ripper teeth
  • The deposit has high resistance to friction and wear
  • Metal recovery approx. 130 %
  • Redrying of the electrodes before use at 300 °C to 350 °C for at least 2 h is recommended
Classification
EN 14700 class
E Fe 4
DIN 8555 class
~E 4-UM-60
Approvals

SEPRO

Validity is confirmed with the order

Chemical composition of the weld metal
C
V
Co
Cr
Mn
Mo
Si
0.70
1.70
2.00
4.00
1.00
7.00
1.00
Values in mass %.
Hardness
56–60 HRC
Process
Polarity
DC+/AC
Treatment and preparation
Re-drying
300–350 °C / 2 h
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-ELHARD-58-EN · rev. 2 · page 1 / 1

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Gedik 2023 catalogue