Download PDF
← Technical datasheet
Gedik · Hardfacing
FERVEO

ELHARD 500 — E Z Fe 1

Technical datasheet · covered electrode · stick electrode · Ø 3.2 – 5 mm
FT-ELHARD-500-EN
rev. 2 · 2026-11-21
page 1 / 1
Type
covered electrode · stick electrode
Standard
E Z Fe 1
Diameters
Ø 3.2 – 5 mm
Sizes and packaging
Ø
Length
Current
Code
3.2 mm
350 mm
100–140 A
GDK-3010101792
4 mm
450 mm
140–180 A
GDK-3010101798
5 mm
450 mm
180–230 A
GDK-3010101804
Application
  • Used for hardfacing bucket teeth, track-chain links, feed rollers, rope sheaves, low-alloy cold-cutting tools, punches and dies of machines working in earthmoving, coal and mining
  • The weld metal resists metal-to-metal friction and impact wear
  • Preheating is generally 200 °C, depending on the parent material
  • Slow cooling gives a softer deposit
  • Can be oil-hardened at 800–850 °C
  • Redrying of the electrodes before use at 300 °C to 350 °C for at least 2 h is recommended
Classification
EN 14700 class
E Z Fe 1
DIN 8555 class
E1-UM-50
Approvals

SEPRO

Validity is confirmed with the order

Chemical composition of the weld metal
C
Cr
Mn
Si
0.30
5.50
1.30
1.20
Values in mass %.
Hardness
approx. 50 HRC
Process
Polarity
DC+
Treatment and preparation
Re-drying
300 °C / 2 h
Pre-heating
200 °C, according to the base material
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-ELHARD-500-EN · rev. 2 · page 1 / 1

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Gedik 2023 catalogue