Gedik · Hardfacing

ELHARD 400 — E Fe 1
Technical datasheet · covered electrode · stick electrode · Ø 4 – 5 mm
FT-ELHARD-400-EN
rev. 2 · 2026-11-21
page 1 / 1
rev. 2 · 2026-11-21
page 1 / 1
Type
covered electrode · stick electrode
Standard
E Fe 1
Diameters
Ø 4 – 5 mm
Sizes and packaging
Ø
Length
Current
Code
4 mm
450 mm
140–180 A
GDK-3010101783
5 mm
450 mm
180–230 A
GDK-3010101786
Application
- Used for repair welding of continuously working buckets, crawler tracks, idlers and carrier rollers of earthmoving and mining machines such as dozers, graders and excavators, and of rails, punches, dies and impact tools
- Redrying of the electrodes before use at 300 °C to 350 °C for at least 2 h is recommended
Classification
EN 14700 class
E Fe 1
DIN 8555 class
E1-UM-400
Approvals
SEPRO
Validity is confirmed with the order
Chemical composition of the weld metal
C
Cr
Mn
Si
0.14
2.00
1.50
0.60
Values in mass %.
Hardness
400–430 HB
Process
Polarity
DC+
Treatment and preparation
Re-drying
300 °C / 2 h
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-ELHARD-400-EN · rev. 2 · page 1 / 1
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Gedik 2023 catalogue