Gedik · Creep-resisting Cr-Mo steels

ELCOR R CrMo 2 FCW — E 91T1 - B3C/B3M
Technical datasheet · flux-cored wire (FCW) · Ø 1.2 mm
FT-ELCOR-R-CRMO-2-FCW-EN
rev. 2 · 2026-11-21
page 1 / 1
rev. 2 · 2026-11-21
page 1 / 1
Type
flux-cored wire (FCW)
Standard
E 91T1 - B3C/B3M
Diameters
Ø 1.2 mm
Sizes and packaging
Ø
Packaging
Code
1.2 mm
BS 300
GDK-3010500387
Application
- Rutile type flux cored wire for all position welding
- Excellent weldability for vertical up position (PG) and overhead fillet (PD) position
- Good arc stability and weldability
- Shielding gas: 100% CO2 or Ar+CO2 mix
Classification
AWS class
E 91T1 - B3C/B3M
EN ISO class
T CrMo2 R C 1 /T CrMo2 R M 1
Approvals
SEPRO, CE
Validity is confirmed with the order
Chemical composition of the weld metal
C
Cr
Mn
Mo
Si
0.05
2.40
1.00
1.00
0.45
Values in mass %.
Base metals
2.25% Cr - 1% Mo steels such as ASTM A387 or P21/P22 pipes
Mechanical properties
typical values
after heat treatment: 690 °C / 1 h
Yield strength (Rp0.2)
min. 540 MPa
Tensile strength (Rm)
620–760 MPa
Elongation (A5)
min. 18 %
Impact energy (KV)
min. 47 J (20 °C)
Process
Polarity
DC+
Shielding gas
100% CO2, Ar + CO2
Positions
PA flat · PB horizontal-vertical · PC horizontal · PD horizontal-overhead · PE overhead · PF vertical-up · PG vertical-down
Shielding
Requires shielding gas
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-ELCOR-R-CRMO-2-FCW-EN · rev. 2 · page 1 / 1
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Gedik 2023 catalogue