Dratec · Carbon steels

DT-ZiRo MIG — ~ ER 70S-2
Technical datasheet · solid wire · Ø 0.8 – 1.2 mm
FT-DT-ZIRO-MIG-EN
rev. 2 · 2026-11-21
page 1 / 1
rev. 2 · 2026-11-21
page 1 / 1
Type
solid wire
Standard
~ ER 70S-2
Diameters
Ø 0.8 – 1.2 mm
Sizes and packaging
Ø
Packaging
Code
0.8 mm
K300 15–20 kg
DRT-1524-08
1 mm
K300 15–20 kg
DRT-1524-10
1.2 mm
K300 15–20 kg
DRT-1524-12
Indicative diameters; confirmed with the order
Supply programme: spools on request D100 (0.5–1 kg), D200 (2–5 kg)
Application
Welding wire for galvanised and rusty sheets, as well as for welding over shop primers; excellent weldability thanks to an improved fluidity of the weld metal, uniform and smooth weld bead surface. Very suitable when the weld is galvanised afterwards.
Classification
AWS class
~ ER 70S-2
EN ISO class
-G2Ti
Chemical composition of the wire
C
Al
Mn
Si
Ti
Zr
0.06
approx. 0.10
1.10
0.50
approx. 0.10
approx. 0.10
Values in mass %.
Base metals
St 33-St 52.3 · StE255-StE 500 · HI-HII · C10-C35 · St2 · St3 · St4
Mechanical properties
guide values
Yield strength (Rp0.2)
480 MPa
Tensile strength (Rm)
560 MPa
Elongation (A5)
27 %
Impact energy (KV)
100 J
Process
Polarity
DC+
Shielding gas
M1, M2, M3, C
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-DT-ZIRO-MIG-EN · rev. 2 · page 1 / 1
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Dratec 2025 catalogue