Dratec · Creep-resisting Cr-Mo steels

DT-SG CrMo5 MIG — 5.9 ER 502 / A5.28-96: ER80S-B6
Technical datasheet · solid wire · Ø 0.8 – 1.6 mm
FT-DT-SG-CRMO5-MIG-EN
rev. 2 · 2026-11-21
page 1 / 1
rev. 2 · 2026-11-21
page 1 / 1
Type
solid wire
Standard
5.9 ER 502 / A5.28-96: ER80S-B6
Diameters
Ø 0.8 – 1.6 mm
Sizes and packaging
Ø
Packaging
Code
0.8 mm
K300 15–20 kg
DRT-1465-08
1 mm
K300 15–20 kg
DRT-1465-10
1.2 mm
K300 15–20 kg
DRT-1465-12
1.6 mm
K300 15–20 kg
DRT-1465-16
Indicative diameters; confirmed with the order
Supply programme: spools on request D100 (0.5–1 kg), D200 (2–5 kg)
Application
Joint welding in pressure vessel and steam boiler construction, as well as of boilers and pipes resistant to creep and to pressurised hydrogen. Oil-processing industry; service temperature up to 600 °C.
Classification
AWS class
5.9 ER 502 / A5.28-96: ER80S-B6
EN ISO class
G CrMo5Si
Material no. (W.-Nr.)
1.7373
Chemical composition of the wire
C
Cr
Mn
Mo
Si
0.07
5.70
0.50
0.60
0.50
Values in mass %.
Base metals
1.7362 · 12 CrMo 19 5
Mechanical properties
guide values
Yield strength (Rp0.2)
500 MPa
Tensile strength (Rm)
650 MPa
Elongation (A5)
> 18 %
Impact energy (KV)
> 70 J
Service temperature
max. 600 °C
Process
Polarity
DC+
Shielding gas
M1, M2, M3
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-DT-SG-CRMO5-MIG-EN · rev. 2 · page 1 / 1
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Dratec 2025 catalogue