Dratec · Tool steels

DT-SG 2567 TIG — S Fe 3
Technical datasheet · TIG rod · Ø 1 – 3.2 mm
FT-DT-SG-2567-TIG-EN
rev. 2 · 2026-11-21
page 1 / 1
rev. 2 · 2026-11-21
page 1 / 1
Type
TIG rod
Standard
S Fe 3
Diameters
Ø 1 – 3.2 mm
Sizes and packaging
Ø
Packaging
Code
1 mm
box 10 kg
DRT-1538-10
1.6 mm
box 10 kg
DRT-1538-16
2 mm
box 10 kg
DRT-1538-20
2.4 mm
box 10 kg
DRT-1538-24
3.2 mm
box 10 kg
DRT-1538-32
Indicative diameters; confirmed with the order
Application
Surfacing and repairs on hot-work tools made of unalloyed or low-alloy steels. The weld metal retains its strength at high temperatures, has a high wear resistance and a very good tempering resistance. The microstructure of the unannealed weld metal is martensitic with retained austenite and carbides.
Classification
EN 14700 class
S Fe 3
DIN 8555 class
M/WSG3-GZ-45-T
Steel name
30WCrV17-2
Chemical composition of the wire
C
V
W
Cr
Mn
Si
0.30
0.50
4.05
2.30
0.30
0.30
Values in mass %.
Hardness
guide values
untreated
42–48 HRC
after tempering: 400 °C / air
42–46 HRC
after tempering: 600 °C / air
45 HRC
Process
Polarity
DC−
Shielding gas
I1
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-DT-SG-2567-TIG-EN · rev. 2 · page 1 / 1
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Dratec 2025 catalogue