
Dratec · Carbon steels
DT-RF 14 FCW — E71T1-M21AP5-CS2-DH4, E71T1-C1A4-CS2-DH4
flux-cored wire (FCW)
Choose the size
- Ø 1.2 mm≈ 15 kg
- Ø 1.6 mm≈ 15 kg
Supply programme: spools on request D100 (0.5–1 kg), D200 (2–5 kg), K300 (15–20 kg)
To order · price and lead time in the quote
We reply within 1 working day.
How much filler metal do I need?With this product's data: 136 · η 0.85–0.90
Thickness of the plates to be joinedref. 1.3: 3 < t ≤ 10
Sum of all identical welds
5.03–7.21 kg
of DT-RF 14 FCW for 10 m of weld
1 pack of ≈ 15 kg
Calculated with: η 0.85–0.90 — from the datasheet · preparation per EN ISO 9692-1 · EN ISO 5817 level C
See the full calculation →Do I need to preheat?With this product's data: H5
Thickness of the thickest part in the jointmethod B: d from 10 to 90 mm
105 °C
Minimum preheat and minimum interpass temperature
EN 1011-2, annex C, method B · rounded up to 5 °C
✓ Within the range of method B.
Calculated with: HD 5 ml/100 g from this product's class H5 · 136 — gas-shielded flux-cored: 26 V, 220 A, 30 cm/min
See the full calculation →Field of application
Rutile flux-cored wire with fast-freezing slag. Suitable for welding work in all positions; spatter-free, with a very easily removable slag. Very good modelling ability. Recovery >85 %
Base metals
St 37.0-St 52.0HI-HII17Mn4StE 255-StE 460
| Positions | PA flat PB horizontal-vertical PC horizontal PD horizontal-overhead PE overhead PF vertical-up PG vertical-down |
|---|---|
| Polarity | DC+ |
| Shielding gas | M2, M3, C |
Classification and approvals
Classification
| AWS class | E71T1-M21AP5-CS2-DH4, E71T1-C1A4-CS2-DH4 |
|---|---|
| EN ISO class | T 46 4 P M 1 H5 / T46 2 P C 1 H5 |
Approvals
- TÜV, DB, CE
According to the Dratec 2025 catalogue; validity is confirmed with the order
Composition and properties
Chemical composition of the wire
| C | 0.05 |
|---|---|
| Mn | 1.30 |
| Si | 0.50 |
Values in mass %.
Mechanical properties
guide values, with mixed gas
| Yield strength (Rp0.2) | min. 460 MPa |
|---|---|
| Tensile strength (Rm) | 530–680 MPa |
| Elongation (A5) | min. 20 % |
How to weld
Process
| Shielding | Requires shielding gas |
|---|---|
| Recovery | > 85 % |
FERVEO guidance
By problem
Structural steels
Alternatives in the catalogue
Similar
ISO 17632-A: same strength (46), equal or better toughness (47 J at −40 °C), same cored-wire type (P) · ISO 17632-A: same strength (46), equal or better toughness (47 J at −20 °C), same cored-wire type (P)
| Product | Class | Availability |
|---|---|---|
| ELCOR R 81 Ni FCWGedik | T 46 4 1Ni P C 1 | To order · price and lead time in the quote |
| ELCOR R 71 CM FCWGedik | T 46 2 P M 1 | To order · price and lead time in the quote |