
Dratec · Carbon steels
DT-FD2-O FCW — E 71 TGS
flux-cored wire (FCW)
Choose the size
- Ø 0.9 mm≈ 15 kg
- Ø 1.2 mm≈ 15 kg
- Ø 1.6 mm≈ 15 kg
Supply programme: spools on request D100 (0.5–1 kg), D200 (2–5 kg), K300 (15–20 kg)
To order · price and lead time in the quote
We reply within 1 working day.
How much filler metal do I need?With this product's data: 136 · η 0.80–0.90
Thickness of the plates to be joinedref. 1.3: 3 < t ≤ 10
Sum of all identical welds
5.03–7.66 kg
of DT-FD2-O FCW for 10 m of weld
1 pack of ≈ 15 kg
Calculated with: η 0.80–0.90: typical value for process 136 · preparation per EN ISO 9692-1 · EN ISO 5817 level C
See the full calculation →Do I need to preheat?With this product's data: H5
Thickness of the thickest part in the jointmethod B: d from 10 to 90 mm
105 °C
Minimum preheat and minimum interpass temperature
EN 1011-2, annex C, method B · rounded up to 5 °C
✓ Within the range of method B.
Calculated with: HD 5 ml/100 g from this product's class H5 · 114 — self-shielded flux-cored: 24 V, 200 A, 25 cm/min
See the full calculation →Field of application
Joint welding of low-alloy steels, preferably in the thin sheet range; also suitable for galvanised sheets; weldable in all positions; it welds WITHOUT gas and leaves an easily removable slag
Base metals
St 35-St 55St 35.4-St 55.4StE255-StE 380HI-HII17Mn419Mn6GS 38-GS 52S235JRG2-S355J2P235GHP265GHP295GH
| Positions | PA flat PB horizontal-vertical PC horizontal PD horizontal-overhead PE overhead PF vertical-up PG vertical-down |
|---|
Classification and approvals
Classification
| AWS class | E 71 TGS |
|---|---|
| EN ISO class | T 42 Z W NO 1 H5 |
Composition and properties
Chemical composition of the wire
| C | 0.15 |
|---|---|
| Al | 0.80 |
| Mn | 1.00 |
| Si | 0.30 |
Values in mass %.
Mechanical properties
guide values
| Yield strength (Rp0.2) | 430 MPa |
|---|---|
| Tensile strength (Rm) | 520 MPa |
| Elongation (A5) | 22 % |
How to weld
Process
| Shielding | Self-shielded (open arc) |
|---|
FERVEO guidance
By problem
Structural steels