Download PDF
← Technical datasheet
Dratec · Hardfacing
FERVEO

DT-DUR 240K FCW — S Fe 9

Technical datasheet · flux-cored wire (FCW) · Ø 1.6 – 2.4 mm
FT-DT-DUR-240K-FCW-EN
rev. 2 · 2026-11-21
page 1 / 1
Type
flux-cored wire (FCW)
Standard
S Fe 9
Diameters
Ø 1.6 – 2.4 mm
Sizes and packaging
Ø
Current
Voltage
Packaging
Code
1.6 mm
160–260 A
20–26 V
K300 15–20 kg
DRT-1755-16
2 mm
220–280 A
22–26 V
K300 15–20 kg
DRT-1755-20
2.4 mm
260–340 A
26–30 V
K300 15–20 kg
DRT-1755-24
Application

Austenitic flux-cored wire for surfacing on parts made of hard manganese steel which are subject predominantly to wear stress of an impact and shock nature. Hammers, crusher rolls and cones, blow bars, etc. The welding must be carried out as cold as possible, as hard manganese steel tends to grain growth and therefore to embrittlement at temperatures above 400 °C. The weld metal is brought to a hardness of 400-450 HB by work hardening

Classification
EN 14700 class
S Fe 9
DIN 8555 class
MF 7 - 200 - K N P
Chemical composition of the wire
C
Cr
Mn
Ni
Si
1.00
4.00
14.0
0.60
0.40
Values in mass %.
Hardness
guide values
200–230 HB
Hardness after work hardening
450 HB
QR code for the current version of this datasheet
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-DT-DUR-240K-FCW-EN · rev. 2 · page 1 / 1

Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.

Prepared by FERVEO from the Dratec 2025 catalogue