Dratec · Copper, brasses and bronzes

DT-CuSn12 TIG — S Cu 5410 (CuSn12P)
Technical datasheet · TIG rod · Ø 1 – 3.2 mm
FT-DT-CUSN12-TIG-EN
rev. 2 · 2026-11-21
page 1 / 1
rev. 2 · 2026-11-21
page 1 / 1
Type
TIG rod
Standard
S Cu 5410 (CuSn12P)
Diameters
Ø 1 – 3.2 mm
Sizes and packaging
Ø
Packaging
Code
1 mm
box 10 kg
DRT-1769-10
1.6 mm
box 10 kg
DRT-1769-16
2 mm
box 10 kg
DRT-1769-20
2.4 mm
box 10 kg
DRT-1769-24
3.2 mm
box 10 kg
DRT-1769-32
Indicative diameters; confirmed with the order
Application
Joint welding of copper-tin alloys, brass, copper-tin-zinc-lead cast alloys, as well as surfacing on cast iron
Classification
EN ISO class
S Cu 5410 (CuSn12P)
Chemical composition of the wire
P
Cu
Sn
0.20
balance
12.0
Values in mass %.
Base metals
2.1020 · 2.1030 · 2.1050 · 2.1052 · 2.1060 · 2.1080 · 2.1086 · 2.1093
Mechanical properties
guide values
Yield strength (Rp0.2)
200 MPa
Tensile strength (Rm)
390 MPa
Elongation (A5)
25 %
Hardness
guide values
100 HB
Process
Polarity
DC−
Shielding gas
I1
Processes
MIG: recommended · TIG: recommended · gas welding: suitable
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-DT-CUSN12-TIG-EN · rev. 2 · page 1 / 1
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Dratec 2025 catalogue