Dratec · Copper, brasses and bronzes

DT-CuAl9Fe MIG — ~ERCuAl-A2
Technical datasheet · solid wire · Ø 0.8 – 1.6 mm
FT-DT-CUAL9FE-MIG-EN
rev. 2 · 2026-11-21
page 1 / 1
rev. 2 · 2026-11-21
page 1 / 1
Type
solid wire
Standard
~ERCuAl-A2
Diameters
Ø 0.8 – 1.6 mm
Sizes and packaging
Ø
Code
0.8 mm
DRT-1883-08
1 mm
DRT-1883-10
1.2 mm
DRT-1883-12
1.6 mm
DRT-1883-16
Supply programme: spools on request D100 (0.5–1 kg), D200 (2–5 kg), K300 (15–20 kg)
Application
Joint welding of copper-aluminium alloys, copper-copper alloys; surfacing on unalloyed and low-alloy steels, as well as on cast iron.
Classification
AWS class
~ERCuAl-A2
EN ISO class
~ S Cu 6180 (CuAl10)
Chemical composition of the wire
Al
Cu
Fe
Mn
Ni
8.50–11.0
balance
0.50–1.50
< 1.00
< 1.00
Values in mass %.
Mechanical properties
guide values
Yield strength (Rp0.2)
200 MPa
Tensile strength (Rm)
450 MPa
Elongation (A5)
20 %
Hardness
guide values
130 HB
Process
Polarity
DC+
Shielding gas
I1
Processes
MIG: recommended · TIG: recommended · gas welding: not suitable
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-DT-CUAL9FE-MIG-EN · rev. 2 · page 1 / 1
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Dratec 2025 catalogue