Dratec · Creep-resisting Cr-Mo steels

DT-CrMo12WV TIG — ~ER505
Technical datasheet · TIG rod · Ø 1 – 3.2 mm
FT-DT-CRMO12WV-TIG-EN
rev. 2 · 2026-11-21
page 1 / 1
rev. 2 · 2026-11-21
page 1 / 1
Type
TIG rod
Standard
~ER505
Diameters
Ø 1 – 3.2 mm
Sizes and packaging
Ø
Packaging
Code
1 mm
box 25 kg
DRT-1707-10
1.6 mm
box 25 kg
DRT-1707-16
2 mm
box 25 kg
DRT-1707-20
2.4 mm
box 25 kg
DRT-1707-24
3.2 mm
box 25 kg
DRT-1707-32
Indicative diameters; confirmed with the order
Application
Joint welding and surfacing on highly creep-resistant, heat-treatable 12 % Cr steels and cast steel grades. Highly creep-resistant up to 550 °C; scale-resistant up to 600 °C.
Classification
AWS class
~ER505
EN ISO class
W CrMoWV12Si
Chemical composition of the wire
C
V
W
Cr
Mn
Mo
Ni
Si
0.20
0.30
0.50
11.0
0.60
1.00
0.40
0.30
Values in mass %.
Base metals
1.4922 · 1.4937
Mechanical properties
guide values, at room temperature
Yield strength (Rp0.2)
> 590 MPa
Tensile strength (Rm)
> 700 MPa
Elongation (A5)
> 15 %
Impact energy (KV)
> 60 J
Service temperature
max. 550 °C
Process
Polarity
DC−
Shielding gas
I1
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-DT-CRMO12WV-TIG-EN · rev. 2 · page 1 / 1
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Dratec 2025 catalogue