Dratec · Aluminium

DT-AlMg3 MIG — ER 5754
Technical datasheet · solid wire · Ø 0.8 – 1.6 mm
FT-DT-ALMG3-MIG-EN
rev. 2 · 2026-11-21
page 1 / 1
rev. 2 · 2026-11-21
page 1 / 1
Type
solid wire
Standard
ER 5754
Diameters
Ø 0.8 – 1.6 mm
Sizes and packaging
Ø
Packaging
Code
0.8 mm
K300 15–20 kg
DRT-1793-08
1 mm
K300 15–20 kg
DRT-1793-10
1.2 mm
K300 15–20 kg
DRT-1793-12
1.6 mm
K300 15–20 kg
DRT-1793-16
Indicative diameters; confirmed with the order
Supply programme: spools on request D100 (0.5–1 kg), D200 (2–5 kg)
Application
For joining aluminium-magnesium alloys.
Classification
AWS class
ER 5754
EN ISO class
Al 5754 - AlMg3
Chemical composition of the wire
Al
Mg
Mn
Ti
balance
3.00
0.30
0.13
Values in mass %.
Base metals
3.3206 · 3.3315 · 3.3525 · 3.3535 · 3.3537 · 3.3541 · AlMg 3 · 3.3535 EN AW–5754 [AlMg 3] · AlMg 2 Mn 0,3 · 3.3525 EN AW–5251 [AlMg 2] · AlMg · 3.3315 EN AW–5005A [AlMg 1 ©] · AlMgSi 0,5 · 3.3206 EN AW–6060 [AlMgSi] · AlMg 2,7 Mn 3.3537 EN AW–5454 [AlMg 3 Mn] · G-AlMg 3 · 3.3541 EN AC–51100 · G-AlMg 3 Si
Mechanical properties
guide values
Yield strength (Rp0.2)
80 MPa
Tensile strength (Rm)
200 MPa
Elongation (A5)
20 %
Process
Polarity
DC+
Shielding gas
I1
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-DT-ALMG3-MIG-EN · rev. 2 · page 1 / 1
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Dratec 2025 catalogue