Dratec · Aluminium

DT-Al 99,5 MIG — 1070
Technical datasheet · solid wire · Ø 0.8 – 1.6 mm
FT-DT-AL-99-5-MIG-EN
rev. 2 · 2026-11-21
page 1 / 1
rev. 2 · 2026-11-21
page 1 / 1
Type
solid wire
Standard
1070
Diameters
Ø 0.8 – 1.6 mm
Sizes and packaging
Ø
Packaging
Code
0.8 mm
K300 15–20 kg
DRT-1768-08
1 mm
K300 15–20 kg
DRT-1768-10
1.2 mm
K300 15–20 kg
DRT-1768-12
1.6 mm
K300 15–20 kg
DRT-1768-16
Indicative diameters; confirmed with the order
Supply programme: spools on request D100 (0.5–1 kg), D200 (2–5 kg)
Application
Joint welding of pure aluminium and Al 99,5
Classification
AWS class
1070
EN ISO class
Al 1070 (Al99,7)
Chemical composition of the wire
Al
Cu
Fe
Si
Zn
> 99.7
< 0.04
< 0.25
< 0.20
< 0.04
Values in mass %.
Base metals
3.0205 · 3.0255 · 3.0257 · 3.0275 · Al 99,0 · 3.0205 EN AW–1200 [Al 99,0] · Al 99,5 · 3.0255 EN AW–1050A [Al 99,5] · Al 99,7 · 3.0275 EN AW–1070A [Al 99,7] · E-Al · 3.0257 EN AW–1350 [E-Al 99,5]
Mechanical properties
guide values
Yield strength (Rp0.2)
30 MPa
Tensile strength (Rm)
80 MPa
Elongation (A5)
30 %
Process
Polarity
DC+
Shielding gas
I1
FERVEO IBERICA, S.L.U. · NIF B05613559 · Avda. del Tomillar, 70, 29631 Benalmádena (Málaga) · Registered in the Registro Mercantil de Málaga, sheet MA-201214 · info@ferveo.eu · www.ferveo.eu · FT-DT-AL-99-5-MIG-EN · rev. 2 · page 1 / 1
Typical values, not guaranteed: this document is not a declaration of performance and does not replace the manufacturer's official documentation or the applicable WPS.
Prepared by FERVEO from the Dratec 2025 catalogue