We open on 1 January 2027. Until then we are not accepting registrations or requests.
Datasheetas published in the maker's catalogueCross-referencesacross makers and AWS / EN ISO classesDeliverySpain and PortugalESPTEN
FERVEO
Basket
Dratec · Stainless steels

DT-309 F FCW — E 309LT0-1/-4

flux-cored wire (FCW)

Choose the size

  • Ø 1.2 mm · K300 15–20 kg
    ≈ 15 kg
  • Ø 1.6 mm · K300 15–20 kg
    ≈ 15 kg
  • Ø 2.4 mm · K300 15–20 kg
    ≈ 15 kg
  • Ø 3.2 mm · K300 15–20 kg
    ≈ 15 kg

Indicative diameters; confirmed with the order

Supply programme: spools on request D100 (0.5–1 kg), D200 (2–5 kg)

To order · price and lead time in the quote

We reply within 1 working day.

How much filler metal do I need?With this product's data: 136 · η 0.80–0.90
Thickness of the plates to be joinedref. 1.3: 3 < t ≤ 10
Sum of all identical welds

5.07–7.71 kg

of DT-309 F FCW for 10 m of weld

1 pack of ≈ 15 kg

Calculated with: η 0.80–0.90: typical value for process 136 · preparation per EN ISO 9692-1 · EN ISO 5817 level C

See the full calculation →
Which filler joins two different metals?With this product's data: 309L

With reservationsFN 2.1 (WRC-1992)

  • Ferrite below 3 FN: risk of hot cracking (API RP 582, TWI).

Maximum dilution with this filler: 25.5 %

Calculated with: filler 309L — this product · dilution 30 % typical of 136, equal shares of each metal

See the full calculation →

Field of application

Joint welding of high-alloy materials for service temperatures up to 300 °C (scale-resistant up to 1000 °C); joint welding of dissimilar steels

Base metals

1.43011.47131.47241.48281.4878St E 355
PositionsPA flat PB horizontal-vertical
PolarityDC+
Shielding gasM21, C1

Classification and approvals

Classification

AWS classE 309LT0-1/-4
EN ISO classT 23 12 L R C/M 3
Material no. (W.-Nr.)1.4332

Approvals

  • TÜV
According to the Dratec 2025 catalogue; validity is confirmed with the order

Composition and properties

Chemical composition of the wire

C0.02
Cr23.0
Mn1.40
Ni13.0
Si0.70
Values in mass %.

Mechanical properties

guide values
Yield strength (Rp0.2)450 MPa
Tensile strength (Rm)580 MPa
Elongation (A5)35 %
Impact energy (KV)43 J (−20 °C)
Service temperaturemax. 300 °C

How to weld

Process

ShieldingRequires shielding gas
FERVEO guidance
By problem
Dissimilar metalsStainless steel and dissimilar metalsCorrosion-resistant alloys